Bosch DHL 755 B Installation Manual download pdf (Page 8)

Service

English 6

Install Housing See “General Information” on page 3 for recommended installation height and

“Mounting Requirements” on page 4 for information on mounting specifications.

Install housing as directed by the manufacturer.

Connect to Ductwork Connect ventilation unit to ductwork in house.

Connect Electric Plug electrical cord into grounded outlet. Before you plug in an electrical cord, be

sure all controls are in the OFF position.

Install the Unit Press unit up into housing until plastic clips on front and rear snap into the hous-

ing. Install 4 screws through tapholes into housing.

Final Steps Install Filters. See Use and Care manual for detailed instructions.

Test The Installation Test the operation of the blower and the lights.

Note: Be sure to check for backdraft. With the blower on high, close the windows

and doors to the area to ensure that fan does not cause back drafting in any outlet

vent for another appliance.

Before Calling

Service

See Use and Care Manual for troubleshooting information. Refer to the Warranty

in the Use and Care Manual. Please be prepared with the information printed on

your product data plate when calling.

Product Data Plate The data plate shows the model and serial number. It is located under the filter.

Figure 9: Install the Unit

Service

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Bosch DHL 755 B Installation Manual Page 8