Bosch GST 14.4 V-Li Professional Specifications download pdf (Page 14)

14 | English

1 619 929 J70 | (23.9.11) Bosch Power Tools

Use of the power tool for operations different from those

intended could result in a hazardous situation.

Battery tool use and care

f Recharge only with the charger specified by the manu-

facturer. A charger that is suitable for one type of battery

pack may create a risk of fire when used with another bat-

tery pack.

f Use power tools only with specifically designated bat-

tery packs. Use of any other battery packs may create a

risk of injury and fire.

f When battery pack is not in use, keep it away from oth-

er metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

f Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally oc-

curs, flush with water. If liquid contacts eyes, addition-

ally seek medical help. Liquid ejected from the battery

may cause irritation or burns.

Service

f Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

Safety Warnings for Jigsaws

f Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

may contact hidden wiring. Cutting accessory contacting

a “live” wire may make exposed metal parts of the power

tool “live” and could give the operator an electric shock.

f Keep hands away from the sawing range. Do not reach

under the workpiece. Contact with the saw blade can lead

to injuries.

f Apply the machine to the workpiece only when

switched on. Otherwise there is danger of kickback when

the cutting tool jams in the workpiece.

f Pay attention that the base plate 7 rests securely on

the material while sawing. A jammed saw blade can

break or lead to kickback.

f When the cut is completed, switch off the machine and

then pull the saw blade out of the cut only after it has

come to a standstill. In this manner you can avoid kick-

back and can place down the machine securely.

f Use only undamaged saw blades that are in perfect con-

dition. Bent or dull saw blades can break, negatively influ-

ence the cut, or lead to kickback.

f Do not brake the saw blade to a stop by applying side

pressure after switching off. The saw blade can be dam-

aged, break or cause kickback.

f Use appropriate detectors to determine if utility lines

are hidden in the work area or call the local utility compa-

ny for assistance. Contact with electric lines can lead to fire

and electric shock. Damaging a gas line can lead to explo-

sion. Penetrating a water line causes property damage.

f Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

f Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

f Do not open the battery. Danger of short-circuiting.

Protect the battery against heat, e.g., against

continuous intense sunlight, fire, water, and

moisture. Danger of explosion.

f In case of damage and improper use of the battery,

vapours may be emitted. Provide for fresh air and seek

medical help in case of complaints. The vapours can irri-

tate the respiratory system.

f Use the battery only in conjunction with your Bosch

power tool. This measure alone protects the battery

against dangerous overload.

f Use only original Bosch batteries with the voltage

listed on the nameplate of your power tool. When using

other batteries, e.g. imitations, reconditioned batteries or

other brands, there is danger of injury as well as property

damage through exploding batteries.

Product Description and

Specifications

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

While reading the operating instructions, unfold the graphics

page for the machine and leave it open.

Intended Use

The machine is intended for making separating cuts and cut-

outs in wood, plastic, metal, ceramic plates and rubber while

resting firmly on the workpiece. It is suitable for straight and

curved cuts with mitre angles to 45°. The saw blade recom-

mendations are to be observed.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 Lock-off button for On/Off switch

2 On/Off switch

3 Battery*

4 Battery unlocking button

5 Allen key

6 Plastic guide plate

7 Base plate

8 Adjusting lever for orbital action

9 Guide roller

10 Lead for the parallel guide

11 Saw blade*

12 SDS clamping lever for saw blade release

13 Contact protector

OBJ_BUCH-1257-002.book Page 14 Friday, September 23, 2011 11:26 AM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 203 204

Comments to this Manuals

No comments

Bosch GST 14.4 V-Li Professional Specifications Page 14

Comments to this Manuals

Related products and manuals for Cordless jigsaws Bosch GST 14.4 V-Li Professional