Bosch GST 18 V-LI Professional Operations Instructions download pdf (Page 19)

English | 19

Bosch Power Tools 1 609 929 W85 | (15.7.10)

f When the cut is completed, switch off the

machine and then pull the saw blade out of

the cut only after it has come to a standstill.

In this manner you can avoid kickback and

can place down the machine securely.

f Use only sharp, flawless saw blades. Bent or

unsharp saw blades can break or cause kick-

back.

f Do not brake the saw blade to a stop by ap-

plying side pressure after switching off. The

saw blade can be damaged, break or cause

kickback.

f Use appropriate detectors to determine if

utility lines are hidden in the work area or

call the local utility company for assistance.

Contact with electric lines can lead to fire

and electric shock. Damaging a gas line can

lead to explosion. Penetrating a water line

causes property damage or may cause an

electric shock.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

f Always wait until the machine has come to

a complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.

f Do not open the battery. Danger of short-

circuiting.

Protect the battery against heat, e. g.,

against continuous intense sunlight,

fire, water, and moisture. Danger of

explosion.

f In case of damage and improper use of the

battery, vapours may be emitted. Provide

for fresh air and seek medical help in case

of complaints. The vapours can irritate the

respiratory system.

f Use the battery only in conjunction with

your Bosch power tool. This measure alone

protects the battery against dangerous over-

load.

f Use only original Bosch batteries with the

voltage listed on the nameplate of your pow-

er tool. When using other batteries, e. g. imi-

tations, reconditioned batteries or other

brands, there is danger of injury as well as

property damage through exploding batteries.

Functional Description

Read all safety warnings and all in-

structions. Failure to follow the

warnings and instructions may re-

sult in electric shock, fire and/or se-

rious injury.

While reading the operating instructions, unfold

the graphics page for the machine and leave it

open.

Intended Use

The machine is intended for making separating

cuts and cut-outs in wood, plastic, metal, ce-

ramic plates and rubber while resting firmly on

the workpiece. It is suitable for straight and

curved cuts with mitre angles to 45°. The saw

blade recommendations are to be observed.

Product Features

The numbering of the product features refers to

the illustration of the machine on the graphics

page.

1 Lock-off button for On/Off switch

2 On/Off switch

3 Battery*

4 Battery unlocking button

5 Allen key

6 Plastic guide plate

7 Base plate

8 Adjusting lever for orbital action

9 Guide roller

10 Lead for the parallel guide

11 Saw blade*

12 SDS clamping lever for saw blade release

13 Contact protector

14 Handle (insulated gripping surface)

15 Button for charge-control indicator*

16 Battery charge-control indicator*

17 Stroke rod

18 Vacuum connection*

19 Vacuum hose*

20 Splinter guard

OBJ_BUCH-1257-001.book Page 19 Thursday, July 15, 2010 9:04 AM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 316 317

Comments to this Manuals

No comments