Bosch F.01U.278.516 User Manual download pdf (Page 14)

14 en | Installation Relay Unit

F.01U.278.516 | V1.0 | 2012.11 User Manual Bosch Security Systems

3.2 Installation

3.2.1 Generalities

 Install the Relay Unit in a dry place, away from any source of heat.

Tools required:

– Torx T20 screwdriver.

– Torx T10 screwdriver.

3.2.2 Installation on a piece of furniture

It is recommended to place the Relay Unit on a non-slippery surface. However, do not place

anything (blanket or lace) on top of the unit.

3.2.3 Wall installation

You can fasten the Relay Unit on a smooth wall surface using two screws. The distance

between holes is 6.2 in (157 mm).

The power line cord should be placed inside the cable channels on the bottom of the Relay

Unit.

3.2.4 Installing the antenna

1. Use the straight adapter (4) for wall installation or the right angled bended adapter (3)

for installation on a piece of furniture.

2. Fasten the adapter (3) or (4) on the antenna connector (1).

3. Fasten the antenna (2) on the adapter.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

No comments

Bosch F.01U.278.516 User Manual Page 14