Bosch B36ET71SN Owner's Manual download pdf (Page 20)

14. Connecting the water to the

appliance

 Remove the cap from the appliance connection (1.).

 Bend the water pipe according to the location of the

connection on the appliance (2.).

 Push the union nut and seal onto the water pipe.

 Push the end of the water pipe into the appliance

connection and screw on the union nut (3.).

Tighten hand-tight.

 Using the open-ended wrench, tighten the union nut. Do

not overturn!

 Open the shut-off valve and main water tap. Check the

connection on the shut-off valve and on the appliance

for leaks.

15. Attaching the toe kick panel

 If required, cut the toe kick panel to the required length.

 Attach base panelling to the appliance.

 Remove the protective film from the adhesive pads on

the Velcro.

 Fit the toe kick panel to the base panel and press firmly

into place.

CAUTION

When bending the water pipe, do not kink it, otherwise

there is a risk of leaks and water damage.

NOTE

When connecting the water pipe to the solenoid valve

of the appliance, follow the instructions supplied by the

manufacturer of the ice maker installation kit enclosed

with the installation manual.

CAUTION

The maximum height of the toe kick panel is 4" from the

top of the floor. Do not cover ventilation slots in the base

panel. Risk of damage to the appliance.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 71 72

No comments

Bosch B36ET71SN Owner's Manual Page 20