Bosch DIP-2042-4HD Installation Manual download pdf (Page 28)

IP>/dlacockpit, then press ENTER. DIVAR IP 2000

Dashboard displays the message that you must open

Configuration > Disk management for configuration.

6. Click Configuration to open the configuration.

7. Expand System, then click Disk management.

8. To add the storage capacity of the hard disks to the system,

follow the instructions that are displayed.

9. After finishing the hard disk setup the individual disk status

LED to the right of the disk carrier will turn blue.

See also:

– Chassis setup, page 16

Updating the system

Following procedure describes how to update the system

manually.

To update DIVAR IP manually:

1. In DIVAR IP Dashboard, click Device monitor in the tree

structure.

2. Click Update manually.

A dialog box is displayed where you can browse for the

update file.

Notice!

If your system is connected to the internet, the system is

automatically checking for updates. If an update is available,

you can download and install it directly. If your system is not

connected to the internet, you can manually download the

latest update package from the product pages. Updating your

system includes all components as well as camera devices.

Updating will take about 5 - 10 minutes and recodings are

stopped during the update process.

8.5

28 en | Maintaining the system DIVAR IP 2000

2014.07 | V1 | DOC Bosch Sicherheitssysteme GmbH

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

No comments

Bosch DIP-2042-4HD Installation Manual Page 28