Bosch D1265 Installation Guide download pdf (Page 9)

D9412GV4/D7412GV4/D7212GV4 Upgrade GV4 Hardware and Programming | en 9

Bosch Security Systems, Inc. Quick Reference Guide F01U215242 | 01 | 2011.10

2.3 Upgrade Programming to a GV4 Control Panel Programming

2.3.1 Upgrade a GV3 Series, GV2 Series, G Series, or Non-G Series Control Panel

to a GV4 or Later Using Remote Programming Software (RPS) 5.14 or Later

RPS version 5.14 or newer is required to upgrade an existing G Series, GV2, or GV3 Series

Control Panel installation to a GV4 Series Control Panel. Refer to the RPS help files for the

specific control panel for additional information on control panel conversion.

1. In RPS, highlight the control panel name by selecting it.

2. Click the View button on the Remote Programmer Toolbar.

3. In the resulting Panel Data - View window, click the Edit button.

4. In the resulting Panel Data - Edit window, select the new control panel type from the

Panel Type drop-down. (If the control panel is a G or Non-G Series control panel, you

must upgrade to GV2 first, followed by GV3, and then repeat each of these steps to

choose the GV4 control panel).

5. Click OK to close window.

6. Click Save in the Panel View window to save the changes and close the Panel View

window.

7. Click Connect. Once connected, the Panel Sync window opens.

8. Select the Send ALL RPS Data to Panel option button and click OK.

9. Once the sync completes, click Disconnect to disconnect from the control panel.

10. Exit RPS.

11. Test the control panel for operation.

NOTICE!

You must upgrade G Series and Non-G Series control panels to GV2 programming prior to

upgrading to GV4 programming.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

No comments

Bosch D1265 Installation Guide Page 9