Bosch GRL160DHV - Dual-Axis Self-Leveling Rotary Laser Service Manual download pdf (Page 17)

-17-

Laser detector power off, Level laser,

Spin mode

4. Locate the laser beam, using the red

sensor panel on the RCR1. As the laser

beam is approached, a single arrow points

in the direction of the beam. The base unit

emits sounds to aid in locating the laser

beam:

• Rapid beep - Indicates that the laser

detector is pointed overly high or far to

the left or right.

• Continuous tone - Indicates that the

laser detector is pointed directly toward

the laser beam.

5. Center the beam by moving the laser

detector in the direction of the arrow.

When the beam is aligned with the center

of the detector panel, both arrows on the

LCD display are lit and the beep is

continuous, indicating that it is properly

centered.

Note: Laser detector orientation depends on

whether it is being used to locate the level or

plumb laser beam.

6. To turn off the RCR1, press its power

On/Off button. There is a double beep for

confirmation, the LCD display becomes

blank, and the lasers shut off.

Charge-control Indicator

When the symbol for the battery indication 37

is indicated on the display 17, the laser

receiver can still be operated for approx. 4

hours.

Level laser detection

Plumb laser detection

LED Indications

Switching on the tool

Tool leveled in/ready

for operation

Battery voltage for 5h

operation

Self-Leveling range

exceeded

Leveling range of the

vertical laser exceeded

Tool In stand-by

operation

Audio Signal

Laser Beam

Continuous lighting and audio signal

Flashing and single audio signals

Green RedYellow

LED

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Comments to this Manuals

No comments

Bosch GRL160DHV - Dual-Axis Self-Leveling Rotary Laser Service Manual Page 17

Comments to this Manuals

Related products and manuals for Power tools Bosch GRL160DHV - Dual-Axis Self-Leveling Rotary Laser