Bosch LTC 8500 Instruction Manual Page 51
- Page / 104
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Alarm Activated Pre-position
EN | 41
15.5 Alarm Activated Pre-position
Alarm activated pre-position capability exists in each of the three (3) alarm response
modes. This enables a pan/tilt/zoom equipped camera to automatically position
itself to a preprogrammed scene as a result of an alarm signal. When using conven-
tional pan/tilt equipped devices and zoom lenses, they must have the necessary
options for pre-position control. The system default is to activate pre-position #16
of the system camera receiving an alarm. Using the optional LTC 8059/00 MCS
package or the optional LTC 8850/00 GUI Software package, the user can config-
ure a response to alarms as required.
15.6 Sample Alarm Responses
Basic Mode
In the Basic alarm response mode, cam-
eras are individually armed for each
alarm monitor.
Monitors and their respectively armed
cameras are programmed individually.
Multiple alarms on monitors are
sequenced automatically.
Alarmed video remains on monitors for
duration of alarm input signal.
Auto-Build Mode
In the Auto-Build alarm response mode,
alarms “build-up” on armed monitors as
new alarms are received.
Any number of monitors may be armed.
Multiple alarms on monitors are
sequenced automatically. Alarm video
remains on monitors for duration of
alarm input signal.
Alarm Status Alarm Station Display
1
st
Alarm Video associated with 1
st
alarm is displayed on any or
all appropriately armed
monitors.
2
nd
Alarm Video associated with 2
nd
alarm is displayed on any or
all appropriately armed
monitors.
3
rd
Alarm Video associated with 3
rd
alarm is displayed on any or
all appropriately armed
monitors.
MONITOR
1
MONITOR
2
MONITOR
8
LTC8500BasicMode.eps
Alarm Status Alarm Station Display
1
st
Alarm
Video associated with
1
st
alarm is displayed
on monitor # 1 (if
armed).
2
nd
Alarm
Video associated with
2
nd
alarm is displayed
on monitor # 2 (if
armed).
3
rd
Alarm
Video associated with
3
rd
alarm is displayed
on monitor # 3 (if
armed).
.
.
.
8
th
Alarm
Video associated with
8
th
alarm is displayed
on monitor # 8 (if
armed).
9
th
Alarm
Video associated with
9
th
alarm is sequenced
with video of 1st alarm
on monitor # 1.
MONITOR
1
MONITOR
2
MONITOR
8
LTC8500AutoBuild.eps
28
1
9
- LTC 8500 Series 1
- Important Safeguards 3
- Safety Precautions 4
- Sécurité 5
- Sicherheitshinweise 5
- Precauciones de Seguridad 5
- Veiligheidsmaatregelen 6
- Sicurezza 6
- Medidas de Segurança 6
- 1Unpacking 11
- 2Service 12
- 3Description 13
- 5System Components 17
- 6System Accessory Components 18
- 6.5 LTC 8555 Series Keyboards 19
- 6.9 AutoDome Series 19
- Integration Server 22
- 6.23 Logging Printer 24
- Logging Printer 25
- 7Installation Procedure 26
- 7. 3Video Output Modules 27
- 7. 4CPU Module 27
- Baud rate -- 19,200 29
- Stop bits -- 1 29
- Data bits -- 8 29
- Parity -- None 29
- Central 31
- Control 31
- Configurations 35
- 10 Feature Selection 37
- 11 Main Power Connections 38
- 12 Video Monitor Display 39
- System Status Display 40
- 13 Factory Default Settings 43
- Lower CPU DIP Switch S1002 44
- S1002 DIP Switch Function 44
- Stop Bits 1 1 1 47
- Data Bits 8 8 8 47
- Parity None None None 47
- Handshake Yes No No 47
- 14 User Information 48
- 15 Alarm Information 50
- 15.6 Sample Alarm Responses 51
- Sequence & Display Mode 52
- 15.7 Alarm Relay Response 53
- 16 Keyboard Operation 54
- 16.3 Switcher Commands 55
- 16.5 Alarm Commands 57
- 16.6 Sequence Control 58
- Run a Sequence 59
- Stop a Running Sequence 59
- 16.7 Sequence Programming 60
- Sequence Function Summary 61
- 17 Keyb oard User Functions 63
- User Function 7 - Set Time 67
- User Function 8 - Set Date 67
- 18 Maintenance Information 75
- 18.3 AC Line Fuse Replacement 76
- 20 Error Messages 80
- 21 Troubleshooting Guide 83
- 21.5 No Alarm Response 84
- 22 Glossary of Terms 86
- Appendix A Satellite Systems 88
- Monitor 92
- Output(s) 92
- Input(s) 92
- CPU Software Version Numbers 93
- C.1 Main Bay Video 96
- C.2 Keyboards 96
- C.3 Alarm Interface Unit 96
- C.4 Signal Distribution Unit 97
- C.5 Receiver/Drivers 97
- Console Port RS-232 Pin-outs 98
- Alarm Port RS-232 Pin-outs 98
- Keyboard RS-485 Ports 98
- Printer Port RS-232 Pin-outs 98
- Code Port Pin-outs 99
- COMM PORT 1 and COMM PORT 2 99
Related products and manuals for Security access control systems Bosch LTC 8500
(20 pages)
(24 pages)
(96 pages)© 2020, manymanuals.com. All rights reserved. | 0.600 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals