Bosch C1210ES Specifications Page 39

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 38
6 720 644 887
Operation instructions
39
Solar mode
The water heater will not ignite if inlet water temperature
exceeds the set temperature on the appliance. In this
condition, the solar mode indicator will show on the
LCD display. See Fig. 54, page 37.
Fig. 58
5.5 Use of optional remote control
accessory (part no. TSTAT2)
Fig. 59 Remote control
The wireless remote control accessory (Fig. 84,
component 13) and the temperature selector buttons
on the front of the water heater operate identically.
Contact your distributor to order the remote control
accessory. Modification of the water heaters interior
control unit (Fig. 84, component 16) is required when
installing the remote control with this heater.
5.6 Operation
B When a hot water tap is opened, main burner ignites
and LCD displays indication .
Fig. 60
B LCD flashes until selected temperature is reached.
B Power bar indicates power percentage in use.
5.7 Reset button
If the LCD shows the error symbol do not shut off
power or unplug the heater. Follow instructions below
to reset error first.
Record the error code on LCD and consult “Problem
solving” section 8.1, page 50.
Fig. 61
After following instructions indicated in
“Troubleshooting” section,
B press reset button to return heater to normal
operation.
Fig. 62 Reset button
If the problem persists, contact your installer.
Warning:
In applications where inlet water
temperature can exceed 140°F (60ºC), a
thermostatic or mixing valve must be
installed before the appliance to prevent
water exceeding 140°F (60°C) from
entering the appliance.
HOT
BURN
D A N G E R
Watertemperatureover125°Fcan
causesevereburnsinstantlyor
deathfromscalds.
Children,disabledandelderlyare
athighestriskofbeingscalded.
Seeinstructionmanualbefore
settingtemperatureatwater
heater.
Feelwaterbeforebathingor
showering.
i
NOTE: up to 6 remote controls can be
programmed for one single water heater,
each with a range distance of 98 ft. (30 m).
Page view 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 71 72

Comments to this Manuals

No comments