Bosch 5302 Technical Information download pdf (Page 7)

- 7 -

Workshop Manual_3 - 4 LD_cod. ED0053025560_4° ed_ rev. 03

General remarks and safety information

Regulations for lifting the engine

- Before removing the engine from the vehicle on which it is installed, disconnect the power supply, detach the fuel and coolant

supply, and all connections including the mechanical ones.

- Attach the engine to a suitable lifting device (lifting beam).

- To move the engine simultaneously use the eyebolts installed, these lifting points are not suitable for the entire machine, then use

the eyebolts installed by the manufacturer.

- Before lifting, make sure the weight is correctly balanced by checking its barycentre.

- Close all engine openings accurately (exhaust, intake, etc.), then wash the outside and dry with a jet of compressed air.

. During operations which involve access to moving parts of

the engine and/or removal of the rotary guards, disconnect

and insulate the positive cable of the battery so as to

prevent accidental short circuits and activation of the starter

motor.

. Check the belt tension only when the engine is turned off.

IMPORTANT

. To start the engine follow the specic instructions provided

in the engine and/or machine operating manual. Do not

use auxiliary starting devices not originally installed on the

machine (e.g. Startpilot systems which utilise ether etc.)

. Before carrying out any work on the engine, turn it off and

allow it to cool down. Do not perform any operation while

the engine is running.

. Check that the discharged oil, the oil lter and the oil

contained in the oil lter are disposed of in such a way as

not to harm the environment.

. Close the fuel tank ller cap carefully after each fílling

operation. Do not ll the tank right up to the top, but leave

sufcient space to allow for any expansion of the fuel.

. Do not smoke or use naked ames while lling.

. Take care when removing the oil lter as it may be hot.

. The operations of checking, lling up and replacing the

cooling liquid must be carried out with the engine turned off

and cold. Take particular care if liquids containing nitrites

are mixed with others not containing these compounds

as this may give rise to the formation of nitrosamines

which are a health hazard. The cooling liquid is polluting,

so dispose of in a manner that does not damage the

environment.

. In order to move the engine simultaneously use the eyebolts

tted for this purpose by Lombardini. These lifting points are

however not suitable for the entire machine, so in this case

use the eyebolts tted by the manufacturer.

California Proposition 65

WARNING

Engine exhaust from this product contains chemicals known to the State of

California to cause cancer, birth defects, or other reproductive harm.

1 2 3 4 5 6 7 8 9 10 11 12 ... 47 48

Comments to this Manuals

No comments

Bosch 5302 Technical Information Page 7

Comments to this Manuals

Related products and manuals for Dishwashers Bosch 5302