Bosch DIE 165 R User Manual download pdf (Page 30)

165R

Assembly

Slide the suspension tube onto the drive shaft tube but

do not tighten the clamping screw.

Fit the clutch housing to the drive shaft tube, making

sure that the tube abuts against the shoulder in the

housing.

Align the housing in relation to the angle gear and

tighten the two clamping screws E and stop screw F (se

Fig. 10:4).

Pull the suspension tube against the clutch housing and

tighten screws B, C and D (see Fig. 10:3).

Connect the throttle control cable.

Mount the engine unit (see “Engine unit - drive shaft,

assembly”).

Enginemounting,driveshaft

Fit new dampers and check that the locating stud in the

clutch housing fits into the hole in the vibration damper.

Fit the suspension tube and clutch housing together

(see “Assembly” above).

Replacementof frontvibration

dampers

Replacementof rearvibration

dampers

Separate the clutch housing and suspension tube (see

“Dismantling” above) until the vibration dampers are ex-

posed

Fig 10:7

Fig 10:5

Back off the screws securing the vibration dampers.

Fig 10:6

Back off the five screws securing the clamp to the handle-

bars and also the locking screw (see Fig. 9:1).

Back off the clamping screw and the two screws in the

vibration dampers.

Slide the holder for the vibration dampers along the drive

shaft tube until the dampers are exposed.

Back off the screws securing the vibration dampers and

change the dampers.

Assemble in reverse order to removal.

On assembly, make sure that the locating studs fit in the

holes in the dampers.

Driveshaft tube

Dismantling

Separate the engine unit from the drive shaft.

Remove the drive shaft and clutch drum.

Remove the clutch housing and suspension tube.

Back off the two clamping screws and the stop screw

holding the angle gear to the drive shaft tube.

Pull the angle gear away from the tube. If it does not

come away easily, slacken the clamping screws still

further and press a wedge (screwdriver) into the ope-

ning.

10:2

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

1 2 ... 25 26 27 28 29 30 31 32 33 34 35

Comments to this Manuals

No comments

Bosch DIE 165 R User Manual Page 30

Comments to this Manuals