Bosch FPD-7024 User Manual download pdf (Page 76)

Programming relays

Shortcut: 0-PROG, 5-PROG OUTPUTS, 2-RELAYS

The main control panel includes three on-board relays (Relay 1, Relay 2, and Relay 3). The

FPD‑7024 can also support up to two D7035 Octal Relay Modules (Remote Relay 1 and

Remote Relay 2), that offer a total of 16 remote relays (eight relays per module).The following

window appears:

RELAY OUTPUTS

1- LOCAL

2- REMOTE 1

3- REMOTE 2

4- MULTIPLEX

Press the number key that corresponds to your selection.

Notice!

The option for multiplex relay programming is visible only if the D7039 Multiplex Expander is

installed.

Local Relays

Shortcut: 0-PROG, 5-PROG OUTPUTS, 2-RELAYS

The display scrolls through the Relay options.

Press [1] for LOCAL. The following window appears:

ONBOARD RELAY

(1-3):

Enter the number corresponding to the relay to be programmed and press [#/Enter]. The

display asks you to enter four zones to activate this output:

OUTPUT ZONE A:_______

(00 - 63):_______

Enter the first zone (00 to 63) you want to assign to this output and press [#/Enter]. A similar

display for Zones B, C and D will appear to allow up to four zones to be assigned to this

output. When all four zones are assigned, the previous window appears.

For pre-assigned zones, see Pre-assigned zone quick reference, 74.

An output point cannot be assigned to more than four zones. Each output does not need to be

assigned to four zones. Each zone can have any number of outputs assigned to it.

Remote relays

Shortcut: 0-PROG, 5-PROG OUTPUTS, 2-RELAYS

The display scrolls through the Relay options. Press [2] for REMOTE 1 or [3] for REMOTE 2.

The following window appears:

REMOTE RELAY @ x

(1 - 8):

8.5.2

76 en | Control Panel Programming Fire Alarm Control Panels

2012.08 | 04 | F01U008458 Installation and Operation Manual Bosch Security System, Inc.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 121 122

No comments

Bosch FPD-7024 User Manual Page 76