Bosch CP009 User Manual download pdf (Page 114)

Baum Tools Unlimited

Page 31

DS2020

User’s Guide

VOLT METER

RANGE : -150V - +150V

CH1

13.4

MIN :0.00V MAX :13.5V

CH2

2.66

MIN :2.08V MAX :3.26V

2.DTY 3.FRQ 4.ALL 5.AMP

ILL. 4-2 Volt Meter

3) From the menu in the bottom window, you can choose other multimeter

function by pressing the corresponding number key. It is not necessary to

return to the upper menu to change the mode.

a. [2. DUTY]: Changes to Duty Cycle mode

b. [3. FREQ]: Changes to Frequency mode

c. [4. ALL]: Changes to Show All mode (Volt + Duty Cycle + Frequency)

d. [ENTER]: Resets Min. and Max. values

4) Calibration

If the voltage values are not equal to zero when the probes are not attached to

any voltage source, the voltage output may not be correct. If this occurs,

calibration is necessary.

For proper calibration, connect the probes of each channel to the ground port

of the 4-channel adaptor and then press the [0] key.

3. Duty Cycle

A. Duty Cycle

Page 31

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 149 150

No comments

Bosch CP009 User Manual Page 114