Bosch CM8S Use and Care Manual download pdf (Page 14)



< .C<61 =<@@6/92 6;7B?F

16@0<;;20A =9B4 3?<: =<D2?

@<B?02 /23<?2 =2?3<?:6;4 .;F .@@2:/9F

.17B@A:2;A@<??2=.6?@

AA.056;4A52B@A.4

To attach the dust bag, squeaze the two wire tabs

together and slide the dust bag over the dust port rib

(see figure 5).

(@6;4.;192.;6;4A52B@A.4

(@6;4B@A.4 – Attach the clean bag to the dust

port.

92.;6;4B@A.4 – After the dust bag is 2/3 to 3/4

full, remove it from the saw. Bring the bag to a proper

container and pull open the zipper located on the

bottom of the bag. Hold the bag by the coupler end

and shake it vigorously until all the dust and debris

fall from it. Close zipper and reattach the bag.

NOTE: Clean the bag at the end of the cutting

session and before transporting or storing the saw.

2 2EA?2:29F 0.?23B9 D52;

16@=<@6;4 <3 1B@A !.A2?6.9@ 6;

36;2=.?A60923<?::.F/22E=9<@6C2<;<AA5?<D

@.D1B@A <; .; <=2; 36?2 &=<;A.;2<B@

0<:/B@A6<;6;A6:2:.F?2@B9A3?<:A52:6EAB?2

<3<69<?D.A2?D6A51B@A=.?A6092@

AA.056;4.).0BB:92.;2?

The elbow has an exit port which will accept a

standard 35mm diameter vacuum fitting or a 1-1/4"

tube diameter. The 35mm diameter fitting is the

standard size used on the Bosch Vacuum Cleaners.

For larger vacuum tube sizes, use an adaptor.

AA.056;4A<).0BB: – Insert the vacuum fitting or

tube into the exit port as far as it will go, (figure 6).

Check to see that the vacuum hose is free from the

mechanism and cutting path before plugging saw into

power source.

%2=<@6A6<;6;4<?%2:<C6;4A52

%B//2?23920A<?

The rubber deflector extends the range of dust and

debris collection and should be left on the tool for

maximum dust pickup efficiency, (figure 7). When

slide cutting extra-tall materials (2-3/4" high), the

rubber deflector will contact and flex over these

materials. It will also contact and flex when the saw is

pulled back before the cut. It will return to its original

shape after the cut.

%2=<@6A6<;6;423920A<? – If the operator wants to

avoid the contact of the rubber deflector with the

material, the deflector can be temporarily folded up

and over the back of the dust chute. If the operator

permanently wants no contact of the deflector with

the material being cut, the deflector may be removed.

*%""

Wire Tabs

Dust Port

Rib

Dust Bag

*%""

Vacuum

Hoses

35 mm

Diameter

1-1/4 inch

Diameter

Exit

Port

@@2:/9F

@@2:/96;4B@A<9920A6<;&F@A2:

FIG. 5

FIG. 6

Rubber

Deflector

FIG. 7

BM 2610025580 05-13_BM CM8S 5/17/13 1:37 PM Page 14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 131 132

Comments to this Manuals

No comments

Bosch CM8S Use and Care Manual Page 14

Comments to this Manuals

Related products and manuals for Mitre saws Bosch CM8S