Bosch CM8S Use and Care Manual download pdf (Page 15)



'< .C<61 =<@@6/92 6;7B?F

6@0<;;20A =9B4 3?<: =<D2?

@<B?02 /23<?2 =2?3<?:6;4 .;F .@@2:/9F

.17B@A:2;A@<??2=.6?@

2.1@@2:/9F <08$6;

he head assembly lock pin (figure 8) is used to hold

the saw’s head assembly in the DOWN position. This

position prevents the head from bouncing up and

down during transportation. This also makes the saw

more compact for lifting and storage. This position is

also required for some calibrating procedures.

'<;4.42A522.1@@2:/9F <08$6;

1. Check that the depth stop plate is disengaged,

pressed in against saw head, (figure 9).

2. Grasp the saw’s main handle and press down on

the head assembly.

3. While pressing the saw head down, push in on the

head assembly lock pin, (figure 8). Release the

head assembly. The head will be locked in the

DOWN position.

'<6@2;4.42A522.1@@2:/9F <08$6;

1. Grasp the main handle and press down on the

head assembly.

2. While pressing the head down, pull out the head

assembly lock pin. Release the lock pin, but

maintain your grip on the main handle. Slowly

allow the spring-loaded saw head to come up to

the top of its travel and then release the handle.

17B@A:2;A@

(@6;4A522.1@@2:/9F <08$6;

*%""

FIG. 8

FIG. 9

2.1

@@2:/9F

<08$6;

2=A5

&A<=$9.A2

BM 2610025580 05-13_BM CM8S 5/17/13 1:37 PM Page 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 131 132

No comments

Bosch CM8S Use and Care Manual Page 15