Flasher-PRO User’s Manual | August 2008 Robert Bosch LLC
Specications | Flasher-PRO | 9
Specications
Flasher-PRO Specications:
Bus Protocols
Primary CAN / ISO15765 / GMLAN f
Secondary CAN / ISO15765 / GMLAN (Dual or Single Wire) f
Ford SCP (J1850PWM) f
GM Class2 (J1850VPW) f
KWP2000 (ISO9141/14230) f
Chrysler SCI (J2610) f
Other
Compliant to SAE J2534 (Feb 2002) and SAE J2534-1 (Dec 2004) f
Compliant to ISO 22900-1 MVCI physical layer f
Programming voltage on J1962 pin 6, 9, 11, 12, 13, 14 or Aux f
Ground pins 9, 12, or 15 f
Note: Drawing current in excess of 200ma on a line congured for
FEPS programming voltage may damage the Flasher-PRO hardware.
Avoid grounding any output pin congured for programming voltage!
Battery Voltage is fused (auto reset) at 200mA.
Name Value
Input Voltage Range
6VDC to 26VDC
Supply Current 320mA @ 6VDC
200mA @12VDC
170mA @15VDC
Operating Temperature +0C to +60C ambient
Storage Temperature -65C to +100C ambient
Size 1.25”H x 7.5”D x 5.25”W
Comments to this Manuals