Bosch Flasher-PRO User Manual download pdf (Page 3)

Robert Bosch LLC Flasher-PRO User’s Manual | August 2008

2 | Flasher-PRO | Getting to Know Flasher-PRO

Getting to Know Flasher-PRO

The Flasher-PRO supports all modern vehicle reprogramming protocols

including: J1850VPW, J1850PWM, CAN, ISO 15765, ISO 9141, ISO

14230/KWP2000, and Chrysler SCI

Your package includes: the Flasher-PRO hardware, a MVCI-J1962

vehicle interface cable, a USB cable, an Ethernet cable, and a CD

including drivers and support tools.

Because J2534-1 is a widely accepted standard, the Flasher-PRO will

work with a variety of ECM reprogramming applications. The EPA-

Published regulation has led to publicly available reprogramming

applications from almost every major automaker. These applications

will allow independent repair shops to update the calibrations on

newer automobiles.

Connectors and Status Indicators

Front Panel

There are 6 status lights on the front panel of the Flasher-PRO.

These status lights are useful for troubleshooting the Flasher-PRO’s

connection to a PC.

The yellow warning light indicates that Flasher-PRO is communicating

with the vehicle. Do not disconnect while this is illuminated! If you

interrupt a reash while the vehicle’s ECU s blank or only partially

programmed, the module may be unrecoverable. Refer to Table 1 for a

description of the other status lights.

Figure 1: Flasher-PRO front plate

1 2 3 4 5 6 7 8 ... 13 14

No comments

Bosch Flasher-PRO User Manual Page 3