Bosch Flasher-PRO User Manual download pdf (Page 11)

Robert Bosch LLC Flasher-PRO User’s Manual | August 2008

10 | Flasher-PRO | Troubleshooting and Support

Troubleshooting and Support

If you cannot communicate with Flasher-PRO

Ask the following questions:

Does Flasher-PRO have power, and is the green power LED illuminated?

Is the battery or power supply voltage between 6VDC and 15VDC, with

correct polarity?

Could any rewall software be interfering with the Ethernet port?

Are you using the correct Ethernet cable: a cross-over cable if

connected directly to a computer or a standard patch cable if

connected to a hub or switch?

Is the green status light illuminated for Ethernet, USB, or wireless?

If these issues have been addressed, veried, and you are still having

trouble, please contact Bosch.

If you need to recover from incorrect

settings (Ethernet Only)

If you are using Ethernet and would like to reset conguration to

default, go to http://Flasher-PRO/, select “Boot Options” and click the

“Load Factory Default Settings” button. Use the default username root

and password powerful when requested.

If all else fails and you cannot reach the Flasher-PRO webpage, hold

down the black button on the front of the Flasher-PRO while powering

on Flasher-PRO to enter recovery mode. This resets Flasher-PRO to

“Client Then Server” mode; it is useful when Flasher-PRO is congured

for an unknown static IP address or invalid boot options.

If you need to generate a logle for debugging

Please see previous section: Flasher-PRO Debug Check Program

If you need to update drivers or rmware

Your Flasher-PRO contains eld-upgradeable rmware. Updates are

regularly released which: include new features, improve performance,

1 2 ... 6 7 8 9 10 11 12 13 14

No comments

Bosch Flasher-PRO User Manual Page 11