Bosch D9210C Owner's Manual download pdf (Page 11)

D9412GV4/D7412GV4/D7212GV4 | Owner's Manual Supplement

Bosch Security Systems, Inc. | 9/11 | F01U245224-02 11

The point state can be NORMAL, OPEN, SHORT, or

MISSING.

7. Activate the point’s sensor and observe the state change.

8. Repeat Steps 5 through 7 until all points are tested.

2.7 Door Activated Custom Function

2.7.1 Description

The D9412GV4 and D7412GV4 allow a custom function to be

activated when user credentials are presented to a D9210C Door

Controller Reader. The custom function executes as if the user

performed a function at the keypad that is associated with the

door controller.

I have this feature.

I do not have this feature.

2.7.2 Using Door Activated Custom Functions:

Executing the door’s custom function by a user that has authority

to do so when disarming the area:

1. Ensure that the area you are about to enter is armed.

2. Present your user credentials to the D9210C Door Controller

Reader. The area disarms and the custom function executes.

The area is now safe to enter.

2.8 Passcode Functions

The GV4 series control panels have several programmable function

options that can be associated with a passcode entry at a

specified keypad. Primary authentication requires a passcode

only. Optionally, a keypad can be programmed for Dual

Authentication where two forms of credentials are required. When

enabled, the secondary authentication is performed with a Door

Controller Reader using a token or a card provided by your dealer.

Once a user’s credentials are authenticated, the configured

function will be performed. Even though an access control device

is used for authentication, the configured Passcode Function may

not be an access operation.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

No comments

Bosch D9210C Owner's Manual Page 11