Bosch D9210C Owner's Manual download pdf (Page 31)

D9412GV4/D7412GV4/D7212GV4 | Owner's Manual Supplement

Bosch Security Systems, Inc. | 9/11 | F01U245224-02 31

3.6.3 Alarms Acknowledged within the Abort Window

If the end user acknowledges an alarm within the Abort Window:

• The alarm output is silenced.

• No alarm, restoral, or cancel reports are sent.

• No alarm, restoral, or cancel reports are entered in the control

panel event log.

3.6.4 At the End of the Alarm Abort Window

If no user acknowledges the alarm within the Alarm Abort Window,

the control panel sends the appropriate alarm reports.

3.7 Cancel Report and Cancel Window

If a user acknowledges an alarm after the Abort Window expires,

but before Bell Time expires, the control panel sends a Cancel

Report. The Cancel Window starts when the alarm is sent and

stops when the Alarm Bell timer expires or a user acknowledges

an alarm.

3.8 Duress Alarm

This feature allows any passcode with the Send Duress permission

enabled to always send a Duress Alarm event upon entry. The

Duress Alarm feature allows an installation to allocate unique

passcodes as the main duress passcodes for all users.

Additionally, when the SIA CP-01 compliant Duress Alarm option is

enabled, the Passcode +1 and +2 options are disabled.

3.9 Swinger Shutdown

This feature allows for a control panel to automatically bypass a point

that reports two or more alarm or trouble events within the same arm

cycle. The maximum number of faults allowed on a point is called the

Swinger Count. This value was set by the installer.

1 2 ... 26 27 28 29 30 31 32

No comments

Bosch D9210C Owner's Manual Page 31