Bosch D621 Series User's Guide download pdf (Page 24)

D621 Series | User's Guide | Turn The System On With No Delay

Bosch Security Systems | 8/04 | 24

Turn The System On With No Delay

Use this command to turn the system All On or Part On

without entry or exit delays. Remember that turning the

system on with no delay allows no exit or entry delay time

through the designated delay point (for example, Front Door).

1. Make sure all points are normal (not faulted).

2. Press [All On] if you want to turn the system All On or

press [Part On] if you want to turn the system Part On.

Press [Cmd] [3] if you want to turn the system Part 2 On.

The keypad may prompt you to enter a valid passcode by

flashing the Cmd indicator.

3. Enter your passcode if necessary. The keypad display

lights the Cmd indicator and either the All On or Part On

indicator.

4. Press [No Delay] to turn the system on with no delay.

There is a 10 second window before the panel arms as No

Delay.

5. To turn the system off, enter your passcode.

Turn The System On With No Exit

Tone

Use this command to turn the entire system All On, Part On,

or Part 2 On without any exit tones. Remember that turning

the system on with no exit tone eliminates the tone emitted by

the keypad intended to alert occupants that the system is

about to arm.

This command is useful when you want to arm the system,

but not disturb the occupants while the system counts down

prior to arming.

1. Make sure all points are normal (not faulted).

2. Press and hold the appropriate key to silence the exit tone

(refer to Table 4 on page 25). The keypad may prompt you

to enter a valid passcode.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 61 62

No comments

Bosch D621 Series User's Guide Page 24