Bosch D621 Series User's Guide download pdf (Page 33)

D621 Series | User's Guide | Add A Passcode (Cmd 56)

Bosch Security Systems | 8/04 | 33

Figure 15: Available User Numbers

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

All

Cmd

Part

Status

4. Press [2] to change passcode authority levels. The

available user numbers now flash.

5. Enter the user number that you want to change the

authority level for, followed by the [*] key. (For example,

press [3] [*] to change the authority level for User 3). The

user number now turns on solid.

If the user does not exist in the system, the

keypad will emit an error tone.

6. Enter the new authority level (1 to 4) followed by [Cmd].

7. The available user numbers flash. Select another user, or

press [Cmd] twice to exit.

Add A Passcode (Cmd 56)

o I can perform this command.

o I cannot perform this command.

Use this command to add new passcodes to the system. This

command requires the appropriate authority level to add

passcodes. To add a new passcode to the system, you must

assign an area(s) to the new user in addition to using the other

Cmd 56 features (changing a passcode and changing a

passcode authority level) as outlined below. Only use this

feature under the direction of your security company.

1. Make sure the system is turned off (All and Part indicators

are off).

2. Press [Cmd] [5] [6]. The keypad may prompt you to enter

a valid passcode by flashing the Cmd indicator.

3. Enter your passcode. Point indicators 1, 2, and 3 flash.

4. Press [3] to assign an area(s) to the new user. The point

indicators flash to indicate available users.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 61 62

No comments

Bosch D621 Series User's Guide Page 33