Bosch AHS 45-16 Instruction Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 103
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
F 016 L70 775 | (8.10.10) Bosch Power Tools
10 | English
Technical Data
Noise/Vibration Information
Measured sound values determined according to
2000/14/EC.
Typically the A-weighted noise levels of the product
are: Sound pressure level 84 dB(A); sound power level
95 dB(A). Uncertainty K =2 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Vibration emission value a
h
<2.5 m/s
2
, Uncertainty
K=1.5m/s
2
.
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure lev-
el over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the op-
erator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm, or-
ganisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the prod-
uct described under “Technical data” is in conformity
with the following standards or standardization docu-
ments: EN 60745 according to the provisions of the di-
rectives 2004/108/EC, 2006/42/EC, 2000/14/EC.
2000/14/EC: Guaranteed sound power level 97 dB(A).
Conformity assessment procedure according to
Annex V.
Equipment category: 25
Technical file at:
Bosch Lawn and Garden Ltd., PT-LG/EAE,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
08.10.2010
Mounting and Operation
Troubleshooting
Hedgecutter AHS 45-16 AHS 50-16 AHS 55-16 AHS 60-16
Article number
3 600 ... H47 A.. H47 B.. H47 C.. H47 D..
Rated power input
W 420 450 450 450
Cutting length
mm 450 500 550 600
Tooth opening
mm 16 16 16 16
No-load stroke rate
min
-1
3400 3400 3400 3400
Weight according to EPTA-Procedure
01/2003
kg 2.6 2.7 2.7 2.8
Protection class
/II /II /II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific coun-
tries, these values can vary.
Please observe the article number on the type plate of your garden product. The trade names of the individual
garden products may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
Action Figure
Delivery Scope 1
Connecting the Extension Lead 2
Starting 2
Stopping 2
Working Advice 2, 3
Blade Maintenance 4
Storage and Transport 4
Selecting Accessories 5
Problem Possible Cause Corrective Action
Hedgecutter does not
operate
Power turned off Turn power on
Mains socket faulty Use another socket
Extension cable damaged Inspect cable, replace if damaged
Fuse faulty/blown Replace fuse
Hedgecutter operates
intermittently
Extension cable damaged Inspect cable, replace if damaged
Internal wiring of garden product damaged Contact Service Agent
On/Off switch defective Contact Service Agent
Motor runs but blades
remain stationary
Internal fault Contact Service Agent
Cutting blade hot Cutting blade blunt Have blade sharpened
Cutting blade has dents Have blade inspected/overhauled
Too much friction, due to lack of lubricant Apply lubricant spray
Excessive vibrations/
noise
Garden product defective Contact Service Agent
OBJ_BUCH-1297-002.book Page 10 Friday, October 8, 2010 11:34 AM
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 102 103

Comments to this Manuals

No comments