Bosch DS7400XiV4-EXP User Manual download pdf (Page 17)

DS7400XiV4-EXP | User Guide | 6.0 Day to Day Operations EN | 17

Bosch Security Systems | 6/05 | 4998154961B

6.2.8 Chime Mode

Chime Mode causes the keypad sounders to beep each time a Perimeter or Entry/Exit zone is triggered when the

control panel is off (disarmed). The [#][7] command is used to turn Chime Mode both off and on.

Table 16: Chime Mode

Action Equipment Command Sequence What Happens

Turn On

Chime Mode

Text keypad

LED keypad

RF3341 keypad

[PIN][#][7] • “Chime Mode On” is displayed for 5 seconds. *

• The LED flashes indicating a signal was sent to your security

system. **

• Keypad sounders beep for 2 seconds whenever a Perimeter

or Entry/Exit zone is triggered.

Turn Off

Chime Mode

Text keypad

LED keypad

RF3341 keypad

[PIN][#][7] • “Chime Mode Off” displays for 5 seconds. *

• The LED flashes indicating a signal was sent to your security

system. **

• Chime Mode is turned off.

* Text Keypad only ** LED Keypad only

6.2.9 Access Control

Your system might use a keypad key sequence to activate other electrical devices. Access control is not available

from an RF (wireless) keypad or from the keyfobs. Refer to Access Code on page 24.

This feature can be used in armed or disarmed modes.

The special PIN required to perform this function is known as an Access Control PIN. This PIN can control

devices that are activated for a short period of time (for example, electric locking mechanisms on a door). Access

PIN activations are recorded in the History Buffer.

Table 17: Access Control

Type of Disarming Command Sequence What Happens

Momentary Access Control Panel Activation [Access Control PIN][Off] The access device is activated for 10 seconds.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

No comments

Bosch DS7400XiV4-EXP User Manual Page 17