Bosch DS7400XiV4-EXP User Manual download pdf (Page 9)

DS7400XiV4-EXP | User Guide | 6.0 Day to Day Operations EN | 9

Bosch Security Systems | 6/05 | 4998154961B

6.1.3 Perimeter Arming

Perimeter arming is used when someone is still in the building, only the exterior (perimeter) zones must be armed,

and an entry/exit delay is in effect.

The green Status LED must be lit and, if using a text keypad, “Ready to Arm” must be displayed. If the green

LED is not on or the keypad displays “Not Ready,” you must use other methods to arm the system (refer to Section

6.2.2 Force Arming on page 13 or Section 6.2.3 Zone Bypass on page 14).

Table 5: Perimeter Arming

Equipment Command Sequence What Happens What To Do

Text Keypad LED

Keypad

[PIN]

[Perimeter Only]

• The red Armed LED flashes.

• “Perimeter On” is displayed. *

• “Exit Now” is displayed during exit-delay.

• The green Status LED lights steady.

• A single beep sounds.

• The red Armed LED lights steady when

the exit-delay period ends.

• The yellow Perimeter LED lights steady.

• Only exterior protection zones are

armed.

• Move freely around the

interior.

• Opening any exterior door

or window triggers an

alarm.

RF3341 Keypad [PIN][#][3] • The LED flashes indicating a signal was

sent to your security system.

• Only exterior protection zones are

armed.

• Move freely around the

interior.

• Opening any exterior door

or window triggers an

alarm.

RF3332/RF3332E,

RF3334/RF3334E

Not applicable

* Text Keypad only

** LED Keypad only

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comments to this Manuals

No comments

Bosch DS7400XiV4-EXP User Manual Page 9

Comments to this Manuals

Related products and manuals for Security access control systems Bosch DS7400XiV4-EXP