Bosch VideoJet 8008 User Manual Page 53

  • Download
  • Add to my manuals
  • Print
  • Page
    / 136
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 52
VideoJet 8008 | Installation and Operating Manual
EN | 53
Bosch Security Systems | 2005-06 | V2.0 Configuration using a Web Browser
Gateway address:
If you want the unit to establish a connection to a remote location in a different
subnet, enter the IP address of the gateway here. Otherwise, this field can
remain empty (0.0.0.0).
Ethernet link type:
If the VideoJet 8008 is connected to the network via a switch, both devices must
have the same preset network connection type. If necessary, ask your network
administrator what value the associated switch is set to.
Choose Auto for an autosensing network connection. If necessary you can set
the value to 10 or 100 MBit/s for either full or half-duplex mode (FD or HD) or to
1 GBit/s FD.
Warning!
Malfunctions (for example image faults) can occur if the capacity of the
network is not sufficient for transmission of the maximum data rate
generated by the VideoJet 8008.
Dyn. DNS server IP address:
When operating a unit on the Internet, an address pool of available dynamic IT
addresses is used for greater efficiency. This means that the unit is assigned a
new IP address each time a connection is made and this address varies. Access
is easier if the unit is listed on a DNS server. It will contact the server at regular
intervals and register its device name and IP address. To connect to the
VideoJet 8008 via the Internet, it is enough to enter the corresponding unit name
and the URL of the DNS server. The server returns the current Internet IP
address for the connection.
The DNS server from videotec.info can be used. The associated IP address is
195.145.107.78. The VideoJet 8008 contacts this server automatically if the
desired refresh interval is entered for the next parameter. For example, if the
name of the VideoJet 8008 is MyVideoJet, in future it is sufficient to enter
MyVideoJet.videotec.info in the browser as the URL to establish a connection.
Dyn. DNS contact interval:
Enter the desired update interval in seconds.
Page view 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 135 136

Comments to this Manuals

No comments