Bosch VideoJet 8008 User Manual download pdf (Page 83)

VideoJet 8008 | Installation and Operating Manual

EN | 83

Bosch Security Systems | 2005-06 | V2.0 Configuration using a Web Browser

Note

The alarm sensors must be activated for them to be able to trigger

recording: You can activate the alarm inputs and video alarms on the

Alarm sources page (see page 84).

– Click in the checkbox for the alarm sensor you want to trigger a recording.

The selected checkbox is marked.

Note

The numbering of the checkboxes for the alarm inputs corresponds to the

labeling of the alarm inputs on the rear panel of the unit. For the video

alarm, the numbering corresponds to the labeling of the video inputs.

Partition total size:

Indicates how much memory space the partition occupies on the hard disk.

Remaining for recording:

Indicates the maximum time remaining for recording. It is automatically updated

after the parameters are changed.

Free space on partition:

Indicates how much space is still free on the partition.

Recording status:

The icon indicates recording activity on this partition. The icon is animated while

recording is in progress.

Format

You can delete all recordings on a partition at any time.

Warning!

Before deleting recordings, check them and back up any important

sequences to your computer's hard drive.

– Click Format to delete all recordings on the partition currently selected.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 135 136

No comments

Bosch VideoJet 8008 User Manual Page 83