Bosch MIC SERIES 500 CAMERA 500 User Manual download pdf (Page 15)

MIC Series 500 Camera Mounting | en 15

Bosch Security Systems, Inc. User’s Manual F.01U.173.601 | 2.0 | 2010.11

Figure 4.3 Typical wall corner mounting arrangement (MIC-CMB, MIC-SCA and MIC-WMB)

4.1 Adjusting the MIC 500 Series Camera

The MIC 500 Series Camera is suitable for adjustment from the upright position (90°) to a

canted (45°) position.

Figure 4.4 Pan body fixing screws

To adjust the MIC 500 Series Camera, follow these steps:

1. Firmly secure the camera base by the 4 inch PCD foot bolts.

2. Locate and remove the two (2) pan body fixing screws. Once the screws have been

loosened, lift them up and continue turning to lock the screws open. Ensure not to

damage the paint work on the camera.

Figure 4.5 Security screws

NOTICE!

The small security screws are not designed to be removed. Any attempt to remove these

screws will void the warranty and potentially cause serious damage to the camera.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

No comments

Bosch MIC SERIES 500 CAMERA 500 User Manual Page 15