Bosch MIC SERIES 500 CAMERA 500 User Manual download pdf (Page 7)

MIC Series 500 Camera Safety | en 7

Bosch Security Systems, Inc. User’s Manual F.01U.173.601 | 2.0 | 2010.11

1.3 Important Notices

Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit

may fall, causing serious injury and/or serious damage to the unit. Use only with the cart,

stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, use

caution and care when moving the cart/apparatus combination to avoid injury from tip-over.

Quick stops, excessive force, or uneven surfaces may cause the cart/unit combination to

overturn. Mount the unit per the manufacturer's instructions.

All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at

least 3 mm in each pole, into the electrical installation of the building.If it is needed to open

the housing for servicing and/or other activities, use this all-pole switch as the main

disconnect device for switching off the voltage to the unit.

Camera grounding - For mounting the camera in potentially damp environments, ensure to

ground the system using the ground connection of the power supply connector (see section:

Connecting external power supply).

Camera lens - An assembled camera lens in the outdoor housing must comply and be tested

in accordance with UL/IEC60950. Any output or signal lines from the camera must be SELV or

Limited Power Source. For safety reasons the environmental specification of the camera lens

assembly must be within the environmental specification of -10 °C (14 °F) to 50 °C (122 °F).

Camera signal - Protect the cable with a primary protector if the camera signal is beyond 140

feet, in accordance with NEC800 (CEC Section 60).

Coax grounding:

– Ground the cable system if connecting an outside cable system to the unit.

– Connect outdoor equipment to the unit's inputs only after this unit has had its grounding

plug connected to a grounded outlet or its ground terminal is properly connected to a

ground source.

– Disconnect the unit's input connectors from outdoor equipment before disconnecting

the grounding plug or grounding terminal.

– Follow proper safety precautions such as grounding for any outdoor device connected to

this unit.

U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides

information regarding proper grounding of the mount and supporting structure, grounding of

the coax to a discharge unit, size of grounding conductors, location of discharge unit,

connection to grounding electrodes, and requirements for the grounding electrode.

Your Bosch product was developed and manufactured with high-quality material and

components that can be recycled and reused. This symbol means that electronic and

electrical appliances, which have reached the end of their working life, must be collected and

disposed of separately from household waste material. Separate collecting systems are

usually in place for disused electronic and electrical products. Please dispose of these units at

an environmentally compatible recycling facility, per European Directive 2002/96/EC.

NOTICE!

This symbol indicates information or a company policy that relates directly or indirectly to the

safety of personnel or protection of property.

NOTICE!

This device is intended for use in public areas only.

U.S. federal law strictly prohibits surreptitious recording of oral communications.

1 2 3 4 5 6 7 8 9 10 11 12 ... 55 56

Comments to this Manuals

No comments

Bosch MIC SERIES 500 CAMERA 500 User Manual Page 7

Comments to this Manuals

Related products and manuals for Security cameras Bosch MIC SERIES 500 CAMERA 500