Bosch MIC SERIES 500 CAMERA 500 User Manual download pdf (Page 36)

36 en | Navigating the Menus MIC Series 500 Camera

F.01U.173.601 | 2.0 | 2010.11 User’s Manual Bosch Security Systems, Inc.

5.9.1 Mapping to a MIC 500 Series Camera Function

If utilizing the mapping functionality of the Sony Set options, there should be a Sony Set table

(1 as default) mapped to normal which changes all of the options set in the other tables back

to a default condition for the camera.

For example, for an ANPR setup on preset 10, table 2 should resemble something as follows:

To ensure that the camera returns to a normal state once leaving this preset, one of the Sony

Set tables must be mapped to Normal and have the following in it:

The normal setup is also loaded on boot. Mapping to an alarm works in exactly the same way

as the preset mapping, being called when the respective alarm input is triggered. If Multi

Alarms is not switched on, then the table can be mapped to the tamper switch input.

The Sony Set sub menu is called in the same way as Setup Tour in that a Sony Set table

number, 1 to 10, must be selected before it is opened.

There are 3 options on the main page which set up the overall information of the Sony Set

table, with the individual commands being specified on the Setup Command List sub menu. If

Preset is selected on the Mapped To option, the number option becomes available, allowing a

SONY SET 1 : WHITE BALANCE

CAPTIONS MAPPED TO PRESET : MANUAL

PRIVACY NUMBER 5 2 : SET RED GAIN

POT TEST : 250

MIC INFORMATION NO. COMMANDS 4 3 : EXPOSURE

ENTER PASSWORD SETUP COMMAND LIST : SHUTTER PRIORITY

HELP 4 : SET SHUTTER

EXIT SAVE SONYSET : 10

EXIT WITHOUT SAVING

Menu Item Description Options

MAPPED TO This is the function to which the current Sony Set table is

mapped. If Sony Set 1 is MAPPED TO preset 23, and if you

perform a go to preset 23 action, the camera will also call up

Sony Set 1 from memory. ALARM maps to a given alarm input,

PRESET W.OUT PTZ means that the camera calls the Sony Set

table but will not moved to the stored position associated with

that preset. NORMAL is the preset that is called whenever the

user moves away from a different mapping; if a Preset mapped

SonySet is called, and then you move away from this position,

the NORMAL Sony Set is called.

Nothing / Normal /

Preset with PTZ /

Preset without PTZ /

Alarm

NUMBER This is the value associated with the MAPPED TO field. Only valid

for some functions, PRESET WITH PTZ, PRESET W.OUT PTZ and

ALARM (multi alarm only).

N/A / Preset 1-64 /

Multi Alarm 1-12

NO. COMMANDS The number of commands available in the currently selected

Sony Set table.

1-10

SETUP COMMAND LIST Sub page for defining each command and associated value.

Function Value

Exposure Shutter Priority

Shutter Set 14

Function Value

Exposure Auto

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 55 56

Comments to this Manuals

No comments

Bosch MIC SERIES 500 CAMERA 500 User Manual Page 36

Comments to this Manuals

Related products and manuals for Security cameras Bosch MIC SERIES 500 CAMERA 500