Bosch VG5-825-ETEV Specifications download pdf (Page 87)

FLIR

26-5

3 Models: PT-Series/D-Series/F-Series

Steps for enabling the Second stream on the PT-Series/D-Series

Before setting a FLIR camera’s IP address on NVR, the user must enable

the second stream for each camera LEN on the PT-Series/D-Series/F-

Series.

Steps for enabling the second stream on each camera for PT-Series/D-

Series:

Open Camera Web Browser

On FLIR Systems Nexus Configuration Page:

Select “Modules”

Select “Video”

On VIDEO Configuration Page

Select Device ID #1 , Select Enabled=yes

Select “Save”

Select Device ID #3, Select Enabled=yes

Select “Save”

Stop Nexus Server

Start Nexus Server

Steps for enabling the second stream for F-Series:

Open Camera Web Browser

On FLIR Systems Nexus Configuration Page:

Select “Modules”

Select “Video”

On VIDEO Configuration Page

Select Device ID #1 , Select Enabled=yes

Select “Save”

Stop Nexus Server

Start Nexus Server

4 This steps are required only if incorrect camera model name is displayed

on NVR. Use the following steps to change the model:

Go to “

ip>/.serial”.

Change model name (i.e. F-324)

This field is shown as the “Name:” in the IRDeviceVersionGet CGI

response.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 107 108

No comments

Bosch VG5-825-ETEV Specifications Page 87