Bosch DIP-7082-8HD Installation Manual download pdf (Page 26)

Rack mounting instructions

This section provides information on installing the chassis into a rack unit. There are a variety

of rack units on the market, which may mean the assembly procedure will differ slightly. You

should also refer to the installation instructions that came with the rack unit you are using.

Notice!

This rail will fit a rack between 26" and 33.5" deep.

Separating the sections of the rack rails

The chassis package includes two rail assemblies in the rack mounting kit. Each assembly

consists of two sections:

–

an inner fixed chassis rail that secures directly to the chassis

– an outer fixed rack rail that secures directly to the rack itself.

To separate the inner and outer rails:

1. Locate the rail assembly in the chassis packaging.

2. Extend the rail assembly by pulling it outward.

3. Press the quick-release tab.

4.3

4.3.1

26 en | Rack installation DIVAR IP 7000 2U

2013.09 | V2 | DOC Installation Manual Bosch Sicherheitssysteme GmbH

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 71 72

No comments

Bosch DIP-7082-8HD Installation Manual Page 26