Bosch GFF 22 A Operations Instructions download pdf (Page 19)

English | 19

Bosch Power Tools 1 609 929 N81 | (23.4.08)

f When working with the machine, always

hold it firmly with both hands and provide

for a secure stance. The power tool is guided

more secure with both hands.

f Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

f Always wait until the machine has come to

a complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.

f Never use the machine with a damaged ca-

ble. Do not touch the damaged cable and

pull the mains plug when the cable is dam-

aged while working. Damaged cables in-

crease the risk of an electric shock.

f Always use the auxiliary handle supplied

with the machine. Loss of control can cause

personal injury.

f The slip safety 9 must always be mounted.

f Use only the cutting tools listed in these op-

erating instructions. Do not use cut-off discs

or circular saw blades.

f Press the spindle lock button 15 only when

the machine is at a standstill.

f Before putting into operation, check the

cutting disc for tight seating.

Functional Description

Read all safety warnings and all

instructions. Failure to follow the

warnings and instructions may re-

sult in electric shock, fire and/or se-

rious injury.

While reading the operating instructions, unfold

the graphics page for the machine and leave it

open.

Intended Use

The machine is intended for cutting grooves for

biscuit dowel joints in chipboard, hard- and soft-

wood, plywood, fibreboard or artificial marble

(e. g. Corian®).

Product Features

The numbering of the product features refers to

the illustration of the machine on the graphics

page.

1 Routing motor

2 Auxiliary handle

3 On/Off switch

4 Clamping lever of the angle stop

5 Height scale

6 Angle scale

7 Knob of the adjustable height stop

8 Centre mark of cut, horizontal

9 Slip safety

10 Adjustable height stop

11 Marks of cutting disc width

12 Centre mark of cut, vertical

13 Clamping lever of adjustable height stop

14 Direction-of-rotation arrow on housing

15 Spindle lock button

16 Attachment plate

17 Angle stop

18 Cutting depth adjustment knob

19 Lock nut for cutting depth adjustment

20 Knurled screw for cutting depth adjustment

21 Vacuum connection

22 Dust bag

23 Two-pin spanner

24 Clamping nut

25 Cutting disc

26 Direction-of-rotation arrow on the cutting

disc

27 Centring collar on mounting flange

28 Mounting flange

29 Cutter spindle

30 Spindle direction-of-rotation arrow

31 Base plate lock washer

32 Base plate clamping screw

33 Base plate

The accessories illustrated or described are not in-

cluded as standard delivery.

OBJ_BUCH-268-002.book Page 19 Wednesday, April 23, 2008 10:14 AM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 266 267

Comments to this Manuals

No comments

Bosch GFF 22 A Operations Instructions Page 19

Comments to this Manuals

Related products and manuals for Straight grinders Bosch GFF 22 A