Bosch WAN20050IL User Manual download pdf (Page 15)

Positioning and connecting en

15

Tip: The following are available from

specialist retailers/our after-sales

service:

■ Extension for Aqua-Stop and cold

water supply hose (approx. 2.50 m);

order no. WMZ 2380, WZ 10130,

Z 7070X0

■ A longer supply hose (approx. 2.20

m) for standard models; individual

component number for the after-

sales service: 00353925

Water inlet

:Warning

Risk of electric shock!

The Aqua-Stop contains an electric

valve. There is a risk of electric shock if

you immerse the Aqua-Stop safety valve

in water. Do not immerse the safety

valve in water.

Notes

■ Only operate the washing machine

using cold mains water.

■ Do not connect the machine to the

mixer tap of an unpressurised hot-

water boiler.

■ Do not use a used supply hose. Only

use the supply hose supplied or one

that was purchased from an

authorised specialist retailer.

■ Do not kink or squash the water

supply hose.

■ Do not alter (shorten, cut through)

the water supply hose (otherwise, its

strength is no longer guaranteed).

■ Only tighten the screw connections

by hand. If the screw connections

are tightened too much with a tool

(pliers), the thread may become

damaged.

■ When connecting to a 21 mm = ½"

tap, first fit an adapter

*

with a sealing

washer from 21 mm = ½" to 26.4

mm = ¾".

Optimum water pressure in the supply

network

At least 100 kPa (1 bar)

Maximum 1000 kPa (10 bar)

When the tap is open, the water flow is

at least 8 l/min.

If the water pressure is higher than this,

a pressure-reducing valve must be

installed.

Connection

Connect the water supply hose to the

water tap (¾" = 26.4 mm) and to the

appliance (not necessary for Aqua-Stop

models as this is permanently installed):

■ Model: Standard

■ Model: AquaSecure

* supplied depending on the model

PLQPP

ê

ë

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Comments to this Manuals

No comments