Bosch WAN20050IL User Manual download pdf (Page 16)

en Positioning and connecting

16

■ Model: Aqua-Stop

Note: Open the water tap carefully,

checking the leak tightness of the

connection points. The screw

connection is under mains water

pressure.

Water outlet

Caution!

Water damage

If the drain hose slips out of the

washbasin or the connection point

during draining due to high water

pressure, any escaping water may

cause water damage.

Secure the drain hose so that it cannot

slip out.

Notes

■ Do not kink the water drain hose or

put strain on it lengthways.

■ Height difference between the

installation surface and the drain:

min. 60 cm, max. 100 cm

You can lay the water drain hose as

follows:

■ Outlet in a sink

:Warning

Risk of scalding!

When you are washing at high

temperatures, there is a risk of

scalding if you come into contact

with hot water (e.g. when draining

hot water into a washbasin).

Do not reach into the hot water.

Caution!

Damage to the appliance/fabrics

If the end of the drain hose is

immersed in the drained water, water

may be sucked back into the

appliance and may damage the

appliance/fabrics.

Make sure that:

– The plug does not prevent

drainage from the sink.

– The end of the drain hose is not

immersed in the drained water.

– The water drains away quickly

enough.

■ Drainage into a siphon

The connection point must be

secured using a hose clamp with a

diameter of 24-40 mm (available

from specialist retailers).

Levelling

Level the appliance using a spirit level.

Incorrect levelling may result in intense

noise, vibrations and "wandering".

1. Loosen the lock nuts using a

wrench, by turning it in a clockwise

direction.

2. Check the alignment of the washing

machine with a spirit level, and

adjust it if necessary. Change the

height by turning the appliance feet.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Comments to this Manuals

No comments