Bosch WAU28460MY Installation Manual download pdf (Page 36)

en Setting the signal

36

Removing laundry/switching

off the appliance

1. Open the washing machine door

and remove the laundry.

2. Turn the programme selector to Off.

Appliance is switched off.

3. Turn off the tap.

Not required for Aqua-Stop models.

Contents of package

Notes

– Do not leave any items of laundry

in the drum. They may shrink in

the next wash or discolour

another item.

– Remove any foreign objects from

the drum and the rubber seal –

risk of rusting.

– Leave the washing machine door

and detergent drawer open so

that any residual water can dry

away.

– Always remove the washing.

– Always wait until the programme

ends, as the appliance could still

be locked. Switch the appliance

on and wait for the unlocking

device.

– If at the end of the programme

the display has gone out, the

energy saving mode is active. To

activate, select any button.

M Setting the signal

Setting the signal

You can change the following settings:

■ The volume for the information

signals (e.g. at the end of the

program) and/or

■ The volume of the audible button

signals.

You will need to activate the setting

mode in order to change these settings.

Activate setting mode:

1. Set the program selector to

position 1. The washing machine is

switched on.

2. Press the A Start/Reload button

and, at the same time, turn the

program selector clockwise to

position 2.Release the button.

The setting mode is activated and the

preset volume for the information

signals appears in the display panel

(e.g. at the end of the program).

1/2/3/... positions on the program

selector









1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Comments to this Manuals

No comments