Bosch WAU28460MY Installation Manual download pdf (Page 37)

Sensors en

37

Changing the volume

Use the ñ Finished In button to change

the following settings at the

corresponding program selector

positions:

■ 2: The volume of the information

signals and/or

■ 3: The volume of the button signals.

Exiting setting mode

You can now end the process and set

the program selector to the Off position.

The settings are saved.

H Sensors

Sensors

Unbalanced load detection

system

The automatic unbalanced load

detection system detects imbalances

and ensures even distribution of the

laundry by repeatedly starting and

stopping drum spinning.

If the laundry is extremely unevenly

distributed, the spin speed is reduced

or the spin cycle is not performed for

safety reasons.

Note: Place large and small items of

laundry evenly in the drum.

2 Cleaning and

maintenance

Cleaning and maintenance

:Warning

Danger of death!

There is a risk of electric shock if you

touch live components.

Switch off the appliance and unplug the

mains plug.

:Warning

Risk of poisoning!

Toxic vapours can be produced by

cleaning agents that contain solvents,

e.g. cleaning solvent.

Do not use cleaning agents that contain

solvents.

Caution!

Damage to the appliance

Cleaning agents that contain solvents,

e.g. cleaning solvent, can damage

surfaces and components in the

machine.

Do not use cleaning agents that contain

solvents.

Machine housing/control

panel

■ Wipe the housing and the control

panel with a soft, damp cloth.

■ Remove the detergent residue

immediately.

■ Do not clean with a water jet.

Drum

Use chlorine-free cleaning agents, do

not use steel wool.

If there are odours in the washing

machine, or to clean the drum, run the

Drum Clean Û 90 °C or

i Cottons 90 °C program without

laundry. Add washing

powder.~ "Faults and what to do

about them" on page 41

0 = off, 1 = quiet,

2 = medium, 3 = loud,

4 = very loud

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Comments to this Manuals

No comments