Bosch EnviroDome Installation Manual download pdf (Page 14)

c. There is a visual confirmation that the address was cleared.

Use ON-997-ENTER to check/confirm camera addresses.

For example, if referring to Camera 3, press

CAMERA-3-ENTER, then ON-997-ENTER. This causes all

cameras to briefly display their addresses.

FastAddress is stored to nonvolatile memory, thus will not change

if power is removed or factory defaults are restored

(SET-899-ENTER).

Figure 3A Enter new address

Figure 3B Clearing address

SECTION 4

AutoDome SECURITY

The AutoDome has password protection capability for

Advanced Menu access and other locked commands.

To set a password, after entering OFF-90-ENTER, enter

SET-802-ENTER and follow the on-screen instructions to set or

change the password. Passwords are four (4) digits in length and

are selected via the joystick.

The AutoDome's default password of 0000 <four zeros> allows

OFF-90-ENTER to directly unlock the Advanced Menu

commands. If the password of 9999 is used, the AutoDome is

totally unlocked so that all AutoDome commands can be

executed (no OFF-90-ENTER is required to use ADVANCED

COMMANDS).

If any other 4-digit password is set, the AutoDome prompts for

entry of a password when the unlock command,

OFF-90-ENTER, is entered.

Section 4

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

No comments

Bosch EnviroDome Installation Manual Page 14