Bosch EnviroDome Installation Manual Page 26
- Page / 40
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
EN
© 2005 Bosch Security Systems Page 26 of 40
SECTION 12
AUTODOME LOCKED COMMANDS
Access to the AutoDome may be password-protected. See SECTION 4, AutoDome Security for details. To use Locked Commands, first unlock
the AutoDome via OFF-90-ENTER. All locked settings, except FastAddress, can then be changed via ON-46-ENTER. Disallow these commands via
ON-90-ENTER.
Section 12
Commands Keystrokes Description
FastAddress On-999-Enter Sets/changes the dome address using the keyboard and on-screen menus. (for cameras not already configured).
On-998-Enter Sets/changes the dome address using the keyboard and on-screen menus. (for all cameras, even those already configured).
Display FastAddress On-997-Enter Briefly displays all dome addresses.
Auto Iris On/Off-3-Enter Camera (Iris) adjusts automatically/manually (On/Off) to light conditions.
Auto Focus On/Off-4-Enter Camera automatically/manually (On/Off) focuses.
Gain Control On/Off-43-Enter Turns gain control to Automatic or Off. When in Automatic mode, the gain increases to compensate for darker scenes.
On-screen Display On/Off-60-Enter Turns On/Off the On-screen Display. When off, there is no On-screen feedback.
On-screen On/Off-61-Enter Changes the characters and position of the display.
Display Adjust On-screen instructions are provided.
Newer versions of the Receiver/Driver, in combination with firmware version 5.10 or higher, allow the brightness to be
adjusted. The firmware automatically detects whether the Receiver/Driver supports this, and displays the selection when
available.
Sector Title Edit On/Off-63-Enter Edits the current Sector name. On-screen instructions are provided.
Sector Blanking On-86-Enter Masks video from being displayed in selected sectors.
Privacy Masking On-87-Enter Masks video from being displayed in selected zones.
Bypass All Off-86-Enter Removes all viewing restrictions imposed by sector blanking/privacy masking but keeps their locations in memory.
Masks/Blanking or Off-87-Enter On-86/87-Enter reactivates all masks/blanking.
Lock/Unlock On/Off-90-Enter Allows/Disallows Locked Commands to be accessed.
Commands
Password Set-802-Enter Sets or displays password. See AutoDome Security, SECTION 4 for details.
Factory Home Set-110-Enter SET recalibrates camera and returns it to home position.
Position
Restore Defaults On-40-Enter Restores Factory Defaults.
Left Limit Set-101-Enter Sets the current position as the left limit of Auto Pan. Default is 0 degrees.
Right Limit Set-102-Enter Sets the current position as the right limit of Auto Pan. Default is 359.9 degrees.
Inactivity On/Off-9-Enter Selects the mode that the dome reverts to after a duration without operator activity. Default is OFF.
Preset On/Off-15-Enter Increase/Decrease (On/Off) the time between Presets during Preset Tour.
Tour Period
AutoPivot On/Off-18-Enter Allows a subject to be followed while beneath the camera, without inverting the picture. Default is ON.
AutoTrack Comms On/Off-77-Enter Enables/Disables the Tracker. When disabled, no status will be displayed. Since this is not retained in non-volatile memory, if
the AutoDome receives Tracker messages on start-up, the Tracker will be enabled again (AutoTracker option ONLY).
Camera Height On/Off-79-Enter Selects the height of the camera in respect to the surface being monitored with the AutoTracker feature
(AutoTracker option ONLY).
Select On/Off-35-Enter Adjusts camera color (white balance) for specific settings.
White Balance or On/Off-30-Enter
Sharpness On/Off-44-Enter Picture (vertical aperture) sharpens/softens.
Iris Adjust On/Off-11-Enter Edits the Auto Iris level.
Shutter On/Off-23-Enter Sliding scale from 1 second to 1/10,000 sec,
(Frame Integration) with Auto Slow Shutter at extreme left.
Sync Mode On/Off-42-Enter Sets camera sync for external-line/internal-crystal (On/Off).
Adjust Line On/Off-41-Enter Changes the phase delay of the camera when in
Lock Phase external line lock mode.
Switch Polarity On-91-Enter Switches the polarity of the Zoom, Focus, and Iris controls.
Digital Zoom On/Off-80-Enter Enables (On) or disables (Off) the digital zoom.
Night Threshold Adj. On-58-Enter Selects the video level at which the camera switches to night mode (Day/Night only).
QuickSet Select On-59-Enter Allows mode selection where multiple camera settings are set according to the chart below (Day/Night only).
SETUP
GENERAL
PTZ
CAMERA
QuickSet Mode Name Gain Control IRIS Slow Shutter IR Filter
Low Light Color Auto Auto Auto In
Full Auto w/ Slow Shutter Auto Auto Auto Auto
Full Auto w/o Slow Shutter Auto Auto 1/60 Auto
Night w/ Slow Shutter Auto Auto Auto Out
Night w/o Slow Shutter Auto Auto 1/60 Out
- AutoDome 1
- Indoor Pendant 1
- In-ceiling Model 1
- Installation Manual 1
- Important Safeguards 2
- Safety Precautions 3
- Introduction 7
- Section 1 10
- Section 2 11
- Section 3 13
- Section 4 14
- Section 5 15
- Section 6 16
- Section 7 17
- Section 8 19
- Section 9 20
- Section 10 23
- Section 11 24
- Section 12 26
- Section 13 27
- Appendix A 34
- Appendix B 35
- User Manual 36
- User Manual Commands 39
Related products and manuals for Bridge cameras Bosch EnviroDome
Bridge cameras Bosch AutoDome User Manual
(42 pages)
(42 pages)
Bridge cameras Bosch AutoDome User Manual
(11 pages)
(11 pages)
Bridge cameras Bosch Camera User Manual
(7 pages)
(7 pages)
Bridge cameras Bosch WZ16 User Manual
(4 pages)
(4 pages)
Bridge cameras Bosch Camera User Manual
(4 pages)
(4 pages)
Bridge cameras Bosch EX14N User Manual
(48 pages)
(48 pages)
Bridge cameras Bosch VEI-30 User Manual
(228 pages)
(228 pages)
(3 pages)
Bridge cameras Bosch NWC-0800 User Manual
(46 pages)
(46 pages)
© 2020, manymanuals.com. All rights reserved. | 0.175 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals