Bosch EnviroDome Installation Manual download pdf (Page 27)

Section 13

SECTION 13

ADVANCED MENU

Main Menu

Depending on the AutoDome password security set for

your system, a password may be required to access the ADVANCED

MENU. This enhanced software makes programming and customiz-

ing the AutoDome easy. All settings are editable via the Main Menu.

Press ON-46-ENTER to enter the Main Menu. If no menu is

displayed, the system may be locked. To unlock the AutoDome, press

OFF-90-ENTER, and follow the on-screen commands to edit the set-

tings. As indicated at the bottom of the screen, use IRIS to SAVE and

EXIT or to RETURN to a previous menu.

CAMERA SETUP

(See FIGURE 13A for CAMERA SETUP menu hierarchy).

White Balance – This camera function maintains proper color reproduction as the color temperature of the scene changes

(i.e. daylight, flourescent). The Factory Default setting is AUTOMATIC.

Choices:

Extended Auto WB . . . .Camera adjusts color using extended range.

*Automatic WB . . . . . . . .Camera constantly adjusts the color.

Indoor WB . . . . . . . . . . .Camera optimizes color for typical indoor conditions.

Outdoor WB . . . . . . . . . .Camera optimizes color for typical outdoor conditions.

One Push WB . . . . . . . .Sets the camera’s color settings for the current scene. Zoom on a well lit, white object

(i.e. a white wall or paper) before activating.

Gain Control – Electronically brightens darker scenes which may cause graininess in low light scenes. The Factory Default

setting is AUTO.

Choices:

Off . . . . . . . . . . . . . . . . . . .Camera uses only the IRIS to adjust to low light.

*Auto . . . . . . . . . . . . . . . . .Camera adds electronic gain based on lighting conditions.

Max Gain Level – Adjusts the maximum gain level that Gain control will adjust to when set to AUTO.

Choices: . . . . . . . . . . . . . .Sliding Scale from 1 to 6 (in 4 dB gain steps).

Sharpness – Adjusts the sharpness/detail of the picture. The Factory Default setting is six on the sliding scale of

about 16.

Choices: . . . . . . . . . . . . . .Sliding Scale from –(soft) to +(sharp).

Synch Mode – Sets the synch mode of the camera. The Factory Default setting is LINE LOCK.

Choices:

Crystal . . . . . . . . . . . . . . . . .Camera is synchronized to an internal crystal (recommended if there is noise on the power line).

*Line Lock . . . . . . . . . . . .Camera is synchronized to AC power. This eliminates picture roll in multicamera systems.

Line Lock Delay – Optimizes LINE LOCK mode to eliminate picture roll in multiphase power applications. The Factory

Default setting is zero.

Choices: . . . . . . . . . . . . . .Sliding Scale (–0° to 359°).

Backlight Compensation – Improves the image quality when the background has a high level of illumination.

Choices: . . . . . . . . . . . . . .On, Off.

Shutter – Sliding scale from 1 sec to 1/10,000 sec, with Auto Slow Shutter at extreme left.

Restore Defaults – Restores ALL choices, for this submenu ONLY, back to the Factory Defaults.

Choices: . . . . . . . . . . . . . .Yes, No.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Comments to this Manuals

No comments

Bosch EnviroDome Installation Manual Page 27

Comments to this Manuals

Related products and manuals for Bridge cameras Bosch EnviroDome