Bosch GKT 55 GCE Specifications download pdf (Page 16)

16 | English

1 609 929 Y20 | (13.7.11) Bosch Power Tools

32 Cutting mark, 0°

33 Cutting mark, 45°

34 Plastic insert for base plate

35 Knurled screws for play adjustment of guide groove

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Noise/Vibration Information

Measured sound values determined according to EN 60745.

Typically the A-weighted noise levels of the product are:

Sound pressure level 92 dB(A); Sound power level

103 dB(A). Uncertainty K =3 dB.

Wear hearing protection!

Vibration total values a

(triax vector sum) and uncertainty K

determined according to EN 60745:

Cutting wood: a

<2.5 m/s

, K=1.5 m/s

Cutting metal: a

<2.5 m/s

, K=1.5 m/s

The vibration emission level given in this information sheet

has been measured in accordance with a standardised test

given in EN 60745 and may be used to compare one tool with

another. It may be used for a preliminary assessment of expo-

sure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different

applications, with different accessories or poorly maintained,

the vibration emission may differ. This may significantly in-

crease the exposure level over the total working period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working pe-

riod.

Identify additional safety measures to protect the operator

from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work pat-

terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-

scribed under “Technical Data” is in conformity with the fol-

lowing standards or standardization documents: EN 60745

according to the provisions of the directives 2004/108/EC,

2006/42/EC.

Technical file (2006/42/EC) at:

Robert Bosch GmbH, PT/ESC,

D-70745 Leinfelden-Echterdingen

Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

25.05.2011

Assembly

Mounting/Replacing the Saw Blade

f Before any work on the machine itself, pull the mains

plug.

f When mounting the saw blade, wear protective gloves.

Danger of injury when touching the saw blade.

f Only use saw blades that correspond with the charac-

teristic data given in the operating instructions.

f Do not under any circumstances use grinding discs as

the cutting tool.

Selecting a Saw Blade

An overview of recommended saw blades can be found at the

end of this manual.

Removal of the Saw Blade (see figure A)

Adjust the maximal cutting depth, see section “Adjusting the

Cutting Depth”.

For changing the cutting tool, it is best to place the machine

on the face side of the motor housing.

– Pivot lever 3 toward the front.

– Push lock-off button 2 toward the front and press the saw

toward base plate 7 until it engages in the position for

changing the saw blade.

– Press the spindle lock button 25 and keep it pressed.

Circular Saw GKT 55 GCE

Professional

Article number

3 601 F75 0..

Rated power input

W1400

No-load speed

min

-1

3600 – 6250

Rotational speed under load, max.

min

-1

5900

Cutting depth, max.

– for 0° bevel angle

– for 45° bevel angle

Spindle lock z

Speed preselection

Constant electronic control

Reduced starting current

Base plate dimensions

mm 154 x 305

Saw blade diameter, max.

mm 165

Saw blade diameter, min.

mm 160

Blade thickness, max.

mm 1.8

Tooth thickness/setting, max.

mm 2.6

Tooth thickness/setting, min.

mm 1.8

Mounting bore

mm 20

Weight according to

EPTA-Procedure 01/2003

kg 4.7

Protection class

/ II

The values given are valid for a nominal voltage [U] of 230 V. For differ-

ent voltages and models for specific countries, these values can vary.

Please observe the article number on the type plate of your machine.

The trade names of the individual machines may vary.

Dr. Egbert Schneider

Senior Vice President

Engineering

Dr. Eckerhard Strötgen

Head of Product

Certification

OBJ_BUCH-1471-001.book Page 16 Wednesday, July 13, 2011 10:56 AM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 207 208

Comments to this Manuals

No comments

Bosch GKT 55 GCE Specifications Page 16

Comments to this Manuals

Related products and manuals for Circular saws Bosch GKT 55 GCE