Bosch DHL505B Installation Manual download pdf (Page 18)

100

Filters and maintenance

2. Press the retaining spring and remove

the filter frame.

3. Remove the wire grille and replace the

filter mat.

4.Install the filter frame in reverse sequence.

Re-attach the retaining spring.

The left and right sides of the filter

frame must lock into position!

Metal grease filter

The filter mat is made of non-combustible

metal.

Caution:

As it becomes more and more saturated

with grease, the filter also becomes

increasingly inflammable. The efficiency of

the extractor hood can also be adversely

affected.

Important:

Clean the metal grease filter at regular

intervals.

Cleaning the metal filter:

Under normal operating conditions (1 to 2

hours per day), the metal grease filter will

require cleaning after 8 to 10 weeks.

❑

The filter can be cleaned in a

dishwasher.

This can however cause slight

discoloration.

Important:

Metal filters that are heavily saturated with

grease should not be cleaned at the same

time as any crockery, etc.

❑

If the filter mat is going to be cleaned by

hand, soak it first of all in a hot deter-

gent solution for several hours.

Clean the filter with a brush, rinse it off

thoroughly and allow it to drip dry.

❑

Use only original replacement filters.

In so doing you will be ensuring that the

extractor hood performs as effectively

as possible.

Removing and installing the grease

filter

Extractor hoods with a filter mat:

1. Rotate the handles on the left and right

of the filter grille.

5750.197 457+458.Bo/Si.qxd 24.01.2005 10:08 Uhr Seite 18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 99 100

Comments to this Manuals

No comments

Bosch DHL505B Installation Manual Page 18

Comments to this Manuals

Related products and manuals for Cooker hoods Bosch DHL505B