Bosch DHL505B Installation Manual download pdf (Page 22)

If you have any questions or if a fault

occurs, please call Customer Service.

(See list of Customer Service

representatives).

When you call, please quote the following:

Enter the relevant numbers into the box

above. The E-Nr. (product no.) and FD

(production date) are shown on the

nameplate which can be seen inside the

extractor hood after the filter frame has

been detached.

E-Nr. FD

Halogen bulbs:

1. Switch off the extractor hood and isolate

by pulling out the mains plug or swit-

ching off the disconnector on the instal-

lation side.

 When switched on, the halogen

bulbs become very hot. Even for some

time after the bulbs have been switched

off there is still a risk of burns.

2. Remove the bulb ring with a screwdriver

or similar tool.

3. Replace the halogen light bulb

(conventional halogen bulb, 12 Volt,

max. 20 Watt, G4 cap).

Caution: Refer to for plug-in

lampholder.

Take hold of the bulb with a clean cloth.

4. Re-insert the bulb ring.

5. Plug the appliance into the mains or

switch it on at the fuse box.

Note: If the light does not function, check

that the bulbs have been inserted correctly.

If you encounter a problemCleaning and care

5750.197 457+458.Bo/Si.qxd 24.01.2005 10:08 Uhr Seite 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 99 100

No comments

Bosch DHL505B Installation Manual Page 22