Bosch GSA 10,8 V-LI Specifications download pdf (Page 16)

16 | English

1 619 P09 831 | (18.8.11) Bosch Power Tools

Use only short saw blades for plunge cutting.

– Place the machine with the edge of the footplate 2 onto the

workpiece and switch on. For power tools with stroke

speed control, set the maximum stroke speed. Press the

power tool firmly against the workpiece and allow the saw

blade to slowly plunge into the workpiece.

– As soon as the footplate 2 fully lays on the surface of the

workpiece, continue sawing alongside the desired cutting

line.

For certain work, the saw blade 1 can also be inserted turned

through by 180 ° and the sabre saw can be guided accordingly

in a reversed manner.

Coolant/Lubricant

When sawing metal, coolant/lubricant should be applied

alongside cutting line because of the material heating up.

Recommendations for Optimal Handling of the Battery

Protect the battery against moisture and water.

Store the battery only within a temperature range between

0 °C and 50 °C. As an example, do not leave the battery in the

car in summer.

Occasionally clean the venting slots of the battery using a soft,

clean and dry brush.

A significantly reduced working period after charging indi-

cates that the battery is used and must be replaced.

Observe the notes for disposal.

Maintenance and Service

Maintenance and Cleaning

f Warning! Prior to any maintenance and cleaning, switch

the machine off and secure the lock-off button 6.

f For safe and proper working, always keep the machine

and ventilation slots clean.

Clean the saw blade holder preferably with compressed air or

a soft brush. Remove the saw blade from the power tool for

this. Ensure proper operation of the saw blade holder by ap-

plying a suitable lubricant.

Heavy contamination of the machine can lead to malfunc-

tions. Therefore, do not saw materials that produce a lot of

dust from below or overhead.

If the machine should fail despite the care taken in manufac-

turing and testing procedures, repair should be carried out by

an after-sales service centre for Bosch power tools.

In all correspondence and spare parts order, please always in-

clude the 10-digit article number given on the type plate of

the machine.

After-sales Service and Customer Assistance

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. Exploded views and information on spare parts can al-

so be found under: www.bosch-pt.com

Our customer service representatives can answer your ques-

tions concerning possible applications and adjustment of

products and accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

Tel. Service: +44 (0844) 736 0109

Fax: +44 (0844) 736 0146

E-Mail: boschse[email protected]

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: +353 (01) 4 66 67 00

Fax: +353 (01) 4 66 68 88

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Inside Australia:

Phone: +61 (01300) 307 044

Fax: +61 (01300) 307 045

Inside New Zealand:

Phone: +64 (0800) 543 353

Fax: +64 (0800) 428 570

Outside AU and NZ:

Phone: +61 (03) 9541 5555

www.bosch.com.au

Republic of South Africa

Customer service

Hotline: +27 (011) 6 51 96 00

Gauteng – BSC Service Centre

35 Roper Street, New Centre

Johannesburg

Tel.: +27 (011) 4 93 93 75

Fax: +27 (011) 4 93 01 26

E-Mail: [email protected]

KZN – BSC Service Centre

Unit E, Almar Centre

143 Crompton Street

Pinetown

Tel.: +27 (031) 7 01 21 20

Fax: +27 (031) 7 01 24 46

E-Mail: bsc.dur@za.bosch.com

Western Cape – BSC Service Centre

Democracy Way, Prosperity Park

Milnerton

Tel.: +27 (021) 5 51 25 77

Fax: +27 (021) 5 51 32 23

E-Mail: [email protected]

OBJ_BUCH-1272-002.book Page 16 Thursday, August 18, 2011 8:25 AM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 169 170

Comments to this Manuals

No comments

Bosch GSA 10,8 V-LI Specifications Page 16

Comments to this Manuals