Bosch DOMESTIC HOT WATER HEAT PUMP User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
CONTROL PANEL
6 720 642 344 (2010/01)
11
6.3 SETTINGS
The function menus are split into different levels to
cover various requirements.
Menu Customer level, the most common functions.
Advanced menu Customer level, other functions.
Installer/Service Basic settings for installers or
service representatives.
Users of the heating installation only see what is
available in the two customer levels.
6.4 MENU
The initial menu in the control unit is called Menu. The
most frequent functions are included here. In Menu
shows the functions that your heating unit is set for. For
example it shows Extra hot water only if a water heater
is connected.
Fig. 7
6.4.1 SET THE HEATING
Depending on whether the system is equipped with a
room temperature sensor or not, two options for setting
up the heating system are available.
HEATING SETUP WITH NO ROOM TEMPERATURE
SENSOR INSTALLED:
Fig. 8
B Select the menu Temperature increase/decrease.
Select one of the options below:
++ Much warmer(approx. +1 °C)
+ Warmer(approx. +0.5 °C)
= No temperature change
- Colder(approx. -0.5 °C)
-- Much colder(approx. -1 °C)
B Press menu dial. Select Save to confirm your choice.
HEATING SETUP WITH A ROOM TEMPERATURE
SENSOR INSTALLED:
Fig. 9
B Select Room temperature setting in the menu.
B Enter the desired room temperature. Min = +10°C,
max = +35°C.
B Select Save to save the change or Cancel to return
without saving.
Under Advanced you can also set how much you want
the room sensor to affect the heating system (Æ
Chapter 6.4.4).
6.4.2 EXTRA HOT WATER
If a DHW cylinder is installed, the DHW temperature can
be increased temporarily to approx. 65 °C with function
Extra hot water. In this case the heat pump is supported
in raising the temperature by the additional heater.
Fig. 10
B Select Extra hot water in the menu.
B Set the number of hours that the function is to be
active by twisting the menu dial. Turn the knob
clockwise to increase and anticlockwise to reduce.
B Select Save to save the change or Cancel to return
without saving.
6 720 641 467-32.1I
6 720 641 467-33.1I
After raising or lowering the temperature
setting wait at least a whole day before
making another temperature adjustment.
6 720 641 467-34.1I
6 720 641 467-35.1I
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comments to this Manuals

No comments