Bosch Flasher-PRO User Manual download pdf (Page 12)

Flasher-PRO User’s Manual | August 2008 Robert Bosch LLC

Troubleshooting and Support | Flasher-PRO | 11

and correct problems. Please visit the Bosch download page at:

http://www.boschdiagnostics.com

To update the Flasher-PRO rmware: Apply power to Flasher-PRO.

Load the conguration webpage in a web browser, and follow the

instructions for selecting and uploading a new rmware le.

To update the PC driver: click on the Installer link like a new

installation.

Verify the network is congured correctly

Try to connect to the Flasher-PRO web page. Consult the networking

section above for details.

If that does not work, try:

Turning off any rewall/antivirus software. f

Picking a different connection method. For example, try the xed IP f

addressing mode.

Using recovery mode to make sure the Flasher-PRO is congured f

correctly. Recovery mode is entered by holding down the front

button during power-on.

If the Flasher-PRO web page works, but applications don’t work:

The DLL may not be installed. Install the DLL using the instructions f

on page 5 of this quick start guide.

The network settings may be incorrect. Specically, verify that f

the Flasher-PRO netmask setting is the same as the PC/laptop’s

netmask setting.

The application may be looking for the wrong J2534 device. Make f

sure “Flasher-PRO” is selected.

If applications work, but not the Flasher-PRO web page:

Verify that your web browser is not using a proxy. (Under Tools >> f

Options >> Local Area Network Settings)

If your PC/Laptop is running rewall software, try turning it off to f

see if that is the problem.

1 2 ... 7 8 9 10 11 12 13 14

No comments

Bosch Flasher-PRO User Manual Page 12