Bosch Flasher-PRO User Manual download pdf (Page 5)

Robert Bosch LLC Flasher-PRO User’s Manual | August 2008

4 | Flasher-PRO | Getting to Know Flasher-PRO

Vehicle Connector

The mating connector is

a standard MVCI, High

Density DB-26.

Pin # Function

1 CAN2 Single Wire

2 J1850PWM+

J1850VPW

3 CAN2+

4 Case Ground

5 Signal Ground

6 CAN+ (CAN-C only)

SCI A Engine

5v-20v out

7 ISO-9141 K-line

SCI A Engine

SCI A Trans

SCI B Engine

8 No Connect

9 SCI B Trans

5v-20v out or short-to-ground

10 J1850PWM-

11 CAN2-

5v-20v out

12 SCI B Engine

5v-20v out or short-to-ground

13 5v-20v out

14 CAN- (CAN-C only)

SCI A Trans

5v-20v out

15 ISO L Line

SCI B Trans

Short-to-ground

16 Battery In (150mA @ 12 VDC)

17 Cable ID 2

18 Cable ID 1

23 +5 output (50mA fused)

26 Ground

Ethernet Lights

Use the standard Ethernet cable

(black) to connect to an existing

network, or use the crossover

cable (blue with red ends) to

connect directly to a laptop.

Color Description

Left Green Ethernet Activity

Right Green Ethernet Link Light

Analog Connector

The 12-bit analog inputs are setup

for an input range of 0 to 27.5VDC

and are electrically protected

against reverse voltage and over

voltage conditions. The Mating

connector is a High Density DB-15

Pin # Function Direction

2 Channel 6 In

4 Channel 3 In

6 Battery

Voltage

Out (200mA

max)

8 Channel 4 In

10 Channel 1 In

12 Channel 5 In

14 Channel 2 In

1, 3, 5,

7, 9, 11,

13, 15

Ground

1 2 3 4 5 6 7 8 9 10 ... 13 14

Comments to this Manuals

No comments