Bosch HBC53R550 Instruction Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
11
Removing the appliance door
1.Open the appliance door fully.
2.Open the locking levers on the left and right-hand side fully.
The hinges are secured and cannot snap closed.
3.Close the appliance door until resistance becomes
noticeable (figure A)
4.With both hands, grip the door on the left and right-hand side,
close the door a little more and pull it out (figure B).
Fitting the appliance door
1.Insert the hinges in the left and right-hand holders (figure C).
The notch on both hinges must engage.
2.Open the appliance door fully.
3.Close the locking levers on the left and right-hand side fully
(figure D).
The appliance door is secured and can no longer be
removed.
4.Close the appliance door.
Cleaning the door panels
To facilitate cleaning, you can remove the inner door panels
from the appliance door.
ã=Risk of injury!
The components inside the appliance door may have sharp
edges. Take care not to cut yourself. Wear protective gloves.
ã=Risk of injury!
The appliance must not be used again until the door panels
and appliance door have been correctly fitted.
Removing the door panel
Note: Before removing, make a note of the orientation in which
the door panel is fitted, so that it is not refitted the wrong way
round.
1.Unhook the appliance door and lay it on a soft, clean surface
with the front side facing downwards (see section: Removing
and installing the appliance door).
2.Unscrew the cover at the top left and right of the appliance
door and detach it (figure A).
3.Lift the door panel and remove it (figure B).
Removing the intermediate panel
1.Press the retainer on the intermediate panel on one side and
unlatch it, using a spatula for instance (figure C).
2.Unlatch the other side in the same way and remove the
intermediate panel.
Cleaning
Clean the door panel with glass cleaner and a soft cloth.
Caution!
Do not use any sharp or abrasive medium or a glass scraper.
The glass could be damaged.
Fitting the intermediate panel
1.Place the intermediate panel in the supports on the left and
right (figure D).
2.Push the intermediate panel downwards in the retainers.
Fitting the door panel
1.Slide in the door panel all the way.
2.Put the cover back in place and screw it in.
3.Refit the appliance door.
$ %
&
'
$
%
&
'
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments