Bosch GSS 280 AE Operations Instructions download pdf (Page 12)

English - 2

Measured values determined according to

EN 60 745.

Typically the A-weighted sound pressure level of

the machine is 76 dB (A). Measurement uncer-

tainty K=3 dB.

When working, the noise level can exceed

85 dB (A).

Wear hearing protection!

The typically weighted acceleration is 3 m/s

Read all instructions. Failure to

follow all instructions listed below

may result in electric shock, fire

and/or serious injury.

Additionally, the general safety instructions either

in the enclosed booklet or those added in the

centre of these operating instructions must be ob-

served.

SAVE THESE INSTRUCTIONS.

■ Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

securely than by hand.

■ Take protective measures when dust can

develop during working that is harmful to

one’s health, combustible or explosive. Ex-

ample: Some dusts are regarded as carcino-

genic. Work with dust/chip extraction and

wear a dust mask.

■ Keep your workplace clean. Material mix-

tures are particularly dangerous. Dust of light

metal can be inflammable or explode.

■ Do not work materials containing asbes-

tos. Asbestos is considered carcinogenic.

■ Do not use a machine with a damaged

mains cable. Do not touch the damaged ca-

ble and pull the mains plug when the cable

is damaged while working. Damaged cables

increase the risk of an electric shock.

■ Connect machines that are used in the

open via a residual current device (RCD).

■ Use the machine only for dry sanding. Wa-

ter penetrating the power tool increases the

risk of an electric shock.

■ Warning. Fire hazard! Avoid overheating of

the material being sanded and of the power

tool, and always empty the dust collector

before taking breaks. Sanding dust in the

dust bag, microfilter, paper bag (or in the filter

bag or filter of the vacuum cleaner) can self-ig-

nite under unfavourable conditions such as

from sparking while sanding metals. Especially

when it is mixed with particles of varnish or

polyurethane or other chemical materials, and

when the material being sanded is hot after

prolonged operation.

The machine is intended for the dry sanding of

surfaces of wood, plastic and filler as well as for

painter surfaces.

■ Before any work on the machine itself, pull the

mains plug.

Selecting the Sanding Sheet

Depending on the material to be worked, different

sanding sheet qualities are to be used:

for the working of all wooden materials.

for the working of paint/enamel coats or primers

and fillers.

Replacing the Sanding Sheet

Before placing on a new sanding sheet, free the

sanding plate from dust and dirt.

To ensure optimum dust extraction, the holes of

the sanding sheet must match with those of the

sanding plate.

Sanding Sheet with Velcro Backing

(see figure )

The sanding sheets are placed directly onto the

sanding plate. The hole pattern in the sanding

plate and sanding sheet must match.

Before placing on the sanding sheet, free the Vel-

cro backing of the sanding plate from dust/debris

by lightly tapping against it.

Noise/Vibration Information

For Your Safety

Intended Use

Replacing the Sanding Sheet

2 609 932 440.book Seite 2 Montag, 13. Dezember 2004 11:06 11

12 • 2 609 932 440 • TMS • 03.12.04

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 69 70

Comments to this Manuals

No comments

Bosch GSS 280 AE Operations Instructions Page 12

Comments to this Manuals

Related products and manuals for Power sanders Bosch GSS 280 AE